Kalmar DCD 370-12CS – specifications
Series: Other models
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
With the DCD 370-12CS Kalmar offers a truck for loads far beyond the scope of ordinary forklifts: the lifting capacity is 37,000 kg at a load centre of 1,200.1 mm. The kerb weight of 47,500 kg and the width of 4,150 mm show that the machine is built for ports, steelworks and heavy-load stores rather than standard halls.
In the name 370 stands for the capacity in hundreds of kilograms and 12 for the large load centre that allows bulky goods such as containers and coils. The ending CS denotes a variant of the range. The wheels are pneumatic, two at the front and two at the rear, so the machine rolls on concrete areas without rutting. Anyone planning to use it must consider floor bearing capacity and weighbridges, because even the kerb weight loads travel routes considerably. It is used mainly in port handling and heavy industry.
Kalmar DCD, DCE and ECE – heavy forklift trucks from Sweden
Kalmar builds cargo-handling equipment for ports, terminals and heavy industry. Its forklift line traces back to the workshop Lidhults Mekaniska Verkstad, which built its first forklift for a local sawmill in 1949 and began serial production in 1952. In 1974 Kalmar Verkstad took over the company and a year later acquired Ljungbytruck; together they operated as Kalmar LMV. Since 2005 Kalmar has been part of Cargotec.
Read on 2 more paragraphs
The DCD, DCE and ECE ranges are typically used for containers, steel, timber and heavy general cargo.
Listed in the register: Kalmar DCD 250-12LB, DCE 80-6XL, DCE 100-12 and ECE 50-6.
Sources: Wikipedia Kalmar Verkstad, Kalmar Historie
Technical data
Dimensions and weights
| Width | 4,150 mmcorrect |
|---|---|
| Unladen weight | 47,500 kgcorrect |
Drivetrain and chassis
| Tyre type | pneumatic tyrescorrect |
|---|
Working data
| Lifting capacity | 37,000 kgcorrect |
|---|
Other data
| Front wheels | 2correct |
|---|---|
| Load centre | 1,200.1 mmcorrect |
| Rear wheels | 2correct |
Frequently asked questions
How much does the Kalmar DCD 370-12CS weigh?
The unladen weight is 47,500 kg.
What is the load capacity of the Kalmar DCD 370-12CS?
Load capacity is 37,000 kg at a 1,200 mm load centre.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.
