Kalepar 2 Axle Semi trailer
Built: 2019-2026 · Series: Other models
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kalepar – other models: the collective page of the Turkish maker's semi-trailers outside the named ranges, single- and twin-axle versions, 5,650 to 10,640 kg unladen weight, 19,700 to 29,500 kg gross weight
This page gathers the Kalepar semi-trailers the register could not assign to a named range. Kalepar is a Turkish maker of semi-trailers; the two types listed here are named directly after their axle count, the single-axle and the twin-axle version. As with many smaller makers, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 5,650 to 10,640 kg, gross weights from 19,700 to 29,500 kg, lengths from 12,290 to 13,700 mm and a width of 2,550 mm.
With gross weights of just under 20 to just under 30 tonnes and lengths close to the European standard of 13.6 metres, these are classic long-haul semi-trailers, towed in combination with a separately registered tractor unit and requiring a category CE licence; the twin-axle version carries both a higher unladen weight and a higher gross weight than the single-axle one.
On a used example, the condition of axles and braking system, the kingpin and fifth-wheel plate, frame and side rails for distortion and rust, the function of the landing legs, and tyres and rims all count; the twin-axle version calls for an extra look at the second axle's alignment. Parts for such small brands usually run through independent commercial-vehicle workshops.
Sources: SpecCodex register, model data: Kalepar (weitere Modelle)
Technical data
Dimensions and weights
| Length | 13,700 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 8,850 mmcorrect |
| Unladen weight | 10,640 kgcorrect |
| Gross vehicle weight | 29,500 kgcorrect |
Drivetrain and chassis
| Wheels | 8correct |
|---|---|
| Top speed | 105 km/hcorrect |
Frequently asked questions
How much does the Kalepar 2 Axle Semi trailer weigh?
The unladen weight is 10,640 kg.
What is the gross vehicle weight of the Kalepar 2 Axle Semi trailer?
29,500 kg.
Up to what speed is the Kalepar 2 Axle Semi trailer approved?
Approved up to 105 km/h.
What are the dimensions of the Kalepar 2 Axle Semi trailer?
13,700 mm × 2,550 mm.
When was the Kalepar 2 Axle Semi trailer built?
Production years: 2019-2026.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
