Jyki 3AKS 1T
Built: 1978 · Series: 3-AKS
More machines from model year 1978
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Jyki 3-AKS – Finnish trailers from Jyväskylä: three-axle versions, 6.8 to 7.7 t unladen weight, 28 to 30 t gross weight, lengths up to 12.55 m
Jyki of Jyväskylä in Finland builds trailers. This page covers the 3-AKS range, whose designation "aks" comes from the Finnish akselinen (axled) and marks the version as a three-axle trailer, with the variants 3-AKS, 3-AKS/340+182, 3-AKS/432+136, 3AKS and 3AKS 1T. As a trailer with its own drawbar, the vehicle runs on its own axles at both ends behind the towing vehicle and, unlike a semi-trailer, does not put a vertical load on the tow hitch.
Read on 3 more paragraphs
The register lists here 5 versions with unladen weights from 6,800 to 7,700 kg, gross weights from 28,000 to 30,000 kg, lengths from 7,150 to 12,550 mm and widths from 2,450 to 2,500 mm.
With gross weights up to 30 tonnes, the 3-AKS counts among the heavier three-axle trailers of Finnish freight transport used by hauliers behind trucks for general cargo, timber and other loads; the length span from 7.15 to 12.55 metres shows short and long variants of the same axle configuration. Three-axle trailers of this kind are common in Finnish freight transport because of the long haul distances and axle-load regulations.
On a used trailer, check for rust on the frame and drawbar, the condition of the three axles, brakes and tyres, and the operation of the lighting and brake connections; spare parts for this Finnish brand usually run through specialist commercial-vehicle workshops. Tyre tread depth and age, and the condition of the jockey wheel and safety chain, also belong in a pre-purchase check.
Sources: SpecCodex register, model data: Jyki 3-AKS, Zulassungsdaten Traficom (Finnland)
Technical data
Dimensions and weights
| Length | 10,400 mmcorrect |
|---|---|
| Width | 2,460 mmcorrect |
| Unladen weight | 7,700 kgcorrect |
| Gross vehicle weight | 28,000 kgcorrect |
Frequently asked questions
How much does the Jyki 3AKS 1T weigh?
The unladen weight is 7,700 kg.
What is the gross vehicle weight of the Jyki 3AKS 1T?
28,000 kg.
What are the dimensions of the Jyki 3AKS 1T?
10,400 mm × 2,460 mm.
When was the Jyki 3AKS 1T built?
Production years: 1978.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
