Jungheinrich ECE236XLNA
Series: Jungheinrich Niederhubwagen
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Jungheinrich ECE236XLNA is a pallet truck from the Jungheinrich Niederhubwagen series.
The ECE236XLNA belongs to the ECE 236 family of electric Jungheinrich pallet trucks. In the USA the ECE 236 series is quoted with a capacity of up to 8,000 lbs; the register gives 3,628 kg.
The lift height of 685 mm raises the pallet clearly above floor level, so it can be moved onto loading surfaces and workstations without manual lifting. An electric pallet truck of this class replaces the hand pallet truck where loads are moved over longer distances or at high weight, for example in goods receiving or when loading.
Jungheinrich Niederhubwagen – electric low-lift pallet trucks from ECE236XLNA to ERE 120-21 160 53: load capacities from 1,200 to 3,628 kg for horizontal pallet transport in warehousing and logistics
Jungheinrich, based in Hamburg, ranks among the leading makers of forklift trucks and warehouse technology; this page lists low-lift pallet trucks of the ECE236XLNA, ECR327, ECR327A, EJE 112, EJE C20, ERC216 and ERE 120-21 160 53 models, which the register could not assign to a named range. Low-lift pallet trucks raise pallets only a few centimetres off the floor for horizontal transport, unlike high-lift trucks or forklifts, which also carry loads up to rack height.
Read on 3 more paragraphs
The register lists here 8 versions with load capacities from 1,200 to 3,628 kg.
Low-lift pallet trucks of this type are standard equipment in warehouses, retail and production logistics, where pallets travel short distances between loading ramp, storage and dispatch. Electrically driven models like these have replaced the once-common hand-pulled pallet trucks in many operations, since they move even heavy loads without manual effort and can be steered precisely through narrow aisles via the tiller.
On a used example, the condition of the drive and load rollers, the tightness of the lift hydraulic pump, the state of the battery and charger on electric models, and wear on the tiller and its controls all matter; spare parts and service run through Jungheinrich's dense dealer network, which usually still stocks wear parts even for older models.
Sources: SpecCodex register, model data: Jungheinrich Niederhubwagen, Jungheinrich
Technical data
Working data
| Lifting capacity | 3,628 kgcorrect |
|---|---|
| Lift height | 685 mmcorrect |
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 2 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: forklift-international.com (retrieved August 2026) · newequipment.com (retrieved October 2026) · allmachines.com (retrieved October 2026) · How we check the data
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.
