John Deere 670
Built: 1989-1997 · Series: Other models
Successor: 4100 →
More machines from model year 1989
The John Deere 670 rolled off the line in 1989-1997 as a tractor. It is powered by a three-cylinder engine producing 13.7 kW.
Power is transmitted through an unsynchronized sliding gear gearbox.
It runs on diesel; the engine is water-cooled. It was replaced by the John Deere 4100. Within the range, rated power spans from 10 to 420 kW; with 13.7 kW, the 670 sits at the bottom end. Directly alongside are the Model MC with 13 kW below and the 20A with 16 kW above.
Technical data
Engine
| Engine make | Yanmarcorrect |
|---|---|
| Engine model | 3TNA72correct |
| Fuel | dieselcorrect |
| Power | 18.5 hp (13.7 kW)correct |
| Cylinders | 3correct |
| Displacement | 54 cu incorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 108.8 in (2763,5 mm)correct |
|---|---|
| Width | 42.6 in - 49.8 incorrect |
| Height | 39.5 in (1003,3 mm)correct |
| Wheelbase | 56.1 in (1424,9 mm)correct |
| Unladen weight | 1, 730 lbs (2WD); 1, 860 lbs (MFWD)correct |
Drivetrain and chassis
| Drive | rear-wheel driveWD/MFWDcorrect |
|---|---|
| Gearbox | non-synchromesh gearbox sliding-gear transmissioncorrect |
| Forward gears | 8correct |
| Reverse gears | 2correct |
Working data
| Lifting capacity | 358 kgcorrect |
|---|---|
| Lifting capacity | 790 lbs (358,3 kg)correct |
| Fuel tank capacity | 6.3 galcorrect |
Origin and approval
| Plant | Japancorrect |
|---|
Other data
| Linkage category | Cat Icorrect |
|---|---|
| PTO speed | 540correct |
| Successor | John Deere 4100correct |
Frequently asked questions
How much power does the John Deere 670 have?
The John Deere 670 delivers 18.5 hp.
What engine does the John Deere 670 have?
3 cylinders, Diesel.
How much does the rear linkage of the John Deere 670 lift?
The rear linkage lifts 358 kg.
When was the John Deere 670 built?
Production years: 1989-1997.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 27 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.