John Deere 1023E Utility
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The John Deere 1023E is a tractor from the John Deere Utility Tractor series. The three-cylinder engine, displacing 1 litres, produces 22 hp (16.6 kW).
Within the range, rated power spans from 21.3 to 58.8 hp; with 22.5 hp, the 1023E sits at the bottom end. Directly alongside are the 20A Open Station with 21.3 hp below and the 1025R with 24.2 hp above.
Technical data
Engine
| Engine model | 3TNM74F-NCJTcorrect |
|---|---|
| Power | 22.5 hp (16.6 kW)correct |
| Cylinders | 3correct |
| Displacement | 993.1 cm³correct |
| Aspiration | Naturalcorrect |
Frequently asked questions
How much power does the John Deere 1023E have?
The John Deere 1023E delivers 22.5 hp.
What engine does the John Deere 1023E have?
3 cylinders, 993 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.