John Deere 20A Open Station Utility
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The John Deere 20A Open Station is a tractor from the John Deere Utility Tractor series. The two-cylinder engine, displacing 1 litres, produces 21 hp (15.7 kW). Rated speed is 3,000 rpm.
Wheelbase is 994 mm.
Within the range, rated power spans from 21.3 to 58.8 hp; with 21.3 hp, the 20A Open Station sits at the bottom end. The next one up is the 1023E with 22.5 hp.
Technical data
Engine
| Power | 21.3 hp (15.7 kW)correct |
|---|---|
| Rated speed | 3,000 rpmcorrect |
| Torque | 52.9correct |
| Speed at max. torque | 2,300 rpmcorrect |
| Cylinders | 2correct |
| Displacement | 955.4 cm³correct |
| Aspiration | naturalcorrect |
Dimensions and weights
| Wheelbase | 993.6correct |
|---|
Drivetrain and chassis
| Gearbox type | Gearcorrect |
|---|---|
| Forward gears | 6correct |
| Reverse gears | 3correct |
Working data
| Pump flow | 19.3 l/mincorrect |
|---|---|
| Fuel tank capacity | 24.2 lcorrect |
Frequently asked questions
How much power does the John Deere 20A Open Station have?
The John Deere 20A Open Station delivers 21.3 hp.
What engine does the John Deere 20A Open Station have?
2 cylinders, 955 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.