John Deere 3400
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine make | John Deerecorrect |
|---|---|
| Fuel | dieselcorrect |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWD/MFWDcorrect |
|---|
Origin and approval
| Plant | Francecorrect |
|---|
Other data
| Abmessungen länge | 4.087 mmcorrect |
|---|---|
| Anzahl zylinder | 4 Leistungcorrect |
| Baureihe modell | 3,400correct |
| Breite | 1.929 mmcorrect |
| Deere modellreihe | 3000ercorrect |
| Drehmomentanstieg | 21 %correct |
| Eigengewicht | 3,825correct |
| Gesamtstückzahl | XXXcorrect |
| Höchstgeschwindigkeit | 30 odercorrect |
| Höhe | 2.550 mmcorrect |
| Motor hubraum | 3.920 cm³correct |
| Radstand | 2.433 mmcorrect |
| Spurweite | 1.500 mmcorrect |
| Typ | 4.039 TRTcorrect |
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 21 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.