John Deere 2850
Built: 1986-1993 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Built in 1986-1993, the John Deere 2850 is a tractor from John Deere. It is powered by a six-cylinder engine producing 71 kW.
It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 10 to 420 kW; with 71 kW, the 2850 sits in the mid-field. Directly alongside are the 6090MC with 70 kW below and the 5090R with 74 kW above.
Technical data
Engine
| Engine make | John Deerecorrect |
|---|---|
| Engine model | 4-239 TLcorrect |
| Fuel | dieselcorrect |
| Power | 95 hp (71 kW)correct |
| Cylinders | 6correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | four-wheel driveWDcorrect |
|---|---|
| Clutch | drycorrect |
Working data
| PTO speed | 540correct |
|---|
Origin and approval
| Plant | Granadero Baigorria, Santa Fe, Argentina; Germanycorrect |
|---|
Frequently asked questions
How much power does the John Deere 2850 have?
The John Deere 2850 delivers 95 hp.
What engine does the John Deere 2850 have?
6 cylinders, Diesel.
When was the John Deere 2850 built?
Production years: 1986-1993.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.