John Deere 2030 – specifications
Series: Other models
Build year not documented · Data origin: Official register, Reference work (Wikipedia/Wikibooks) · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The John Deere 2030 is a tractor produced in Spain by the manufacturer. As a model of the 2.030 series, this machine is positioned in the segment of small to medium-sized agricultural tractors. The total production volume of 24,339 units underscores the widespread use of this type in agricultural operations. The type code 4.219 DL identifies the specific configuration of this series.
The technical foundation is a water-cooled four-cylinder in-line engine with a displacement of 3,595 cm³. At a rated speed of 2,500 rpm, the engine delivers an output of 60 hp. The maximum torque is 23.3 kpm, supported by a torque rise of 15.5%. These values enable good traction under varying load conditions in the field. The fuel tank capacity of 75 l ensures sufficient range during work operations. With a curb weight of 2,570 kg and a width of 1,970 mm, the machine falls within a manageable frame for transport and maneuvering.
Within the available data series, the 2030 occupies a central position. It follows models with lower output and forms the basis for the subsequent, more powerful variants of the series. The number of gears and the top speed of 25 km/h are designed to meet the requirements of field work and road traffic. The Category II three-point hitch allows the attachment of implements with a weight suitable for the tractor's power class. The track width of 1,360 mm provides stable stability on uneven terrain.
John Deere – other models: the collective page of tractors outside the named ranges, from the two-cylinders and the 10 series (1020, 2020) through the 40s and 50s from Mannheim to the 1023E, 3038E and 9RX, 6 to 468 kW
This page gathers the John Deere tractors the register could not assign to a named range – from the successors of the two-cylinders through the European ranges from Mannheim to the compact tractors from Augusta, Georgia. John Deere, founded in 1837 as a plough smithy in Illinois, has built tractors in Waterloo, Iowa, since 1918 and since 1956, with the takeover of Lanz, in Mannheim, today the largest tractor plant outside North America. The type logic: the 10 series of 1960 (1010 to 5010) brought the four- and six-cylinders after the two-cylinder era, the 20s, 30s and 40s (1020, 2130, 2140) the Mannheim generations of the 1960s to 1980s, in which the first digit gives the size and the last ones the generation; the 50s (1750 to 3650) followed in 1986, the 55s and 6000s in 1992. Since 1992 the first digit marks the range (1 to 9) and the following ones the power – 1023E as a 1 series compact with 23 hp, 3038E as a 3 series with 38 hp, 5075E as a 5 series with 75 hp – E, M and R the equipment lines from basic to premium. The engines are Deere's own PowerTech range in the big, Yanmar in the compact and Lombardini in the smallest tractors.
Read on 3 more paragraphs
The register lists here 925 versions with 6.3 to 468.3 kW from one- to six-cylinders of 341 to 13,503 cm³, PTO outputs from 17 to 365 hp, lift capacities from 309 to 13,494 kg, unladen weights from 363 to 20,371 kg, lengths from 2,362 to 6,880 mm and widths from 1,194 to 3,952 mm.
John Deere has been the world's largest farm-equipment maker for decades; the Mannheim 6 series is Europe's best-selling tractor, the compacts from Augusta North America's.
On used tractors, originality and engine condition count on classics, transmission (Synchron or Power-Synchron) and hydraulics on the Mannheim 40s and 50s, and on the E, M and R models operating hours, transmission (PowrQuad, AutoQuad, AutoPowr), electronics and exhaust aftertreatment; parts run through the Deere network.
Sources: SpecCodex register, model data: John Deere (weitere Modelle), John Deere (manufacturer)
Technical data
Engine
| Engine make | John Deerecorrect |
|---|---|
| Power | 60 hp (45 kW)correct |
| Rated speed | 2.500 U/mincorrect |
| Stroke | 110 mmcorrect |
| Cooling | water-cooledcorrect |
| Torque rise | 15, 5 %correct |
Dimensions and weights
| Width | 1,970 mmcorrect |
|---|---|
| Height | 2,440 mmcorrect |
| Wheelbase | 2,178 mmcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWD/MFWDcorrect |
|---|
Working data
| Fuel tank capacity | 75 lcorrect |
|---|
Origin and approval
| Plant | Spaincorrect |
|---|---|
| Type | 4.219 DLcorrect |
| Series/Model | 2,030correct |
Other data
| Cylinders | 4 Leistungcorrect |
|---|---|
| Displacement | 3.595 cm³correct |
| Drehmoment bei höchstleistung | 20, 0 kpmcorrect |
| Einspritzdüsen | Stanadynecorrect |
| Einspritzmenge | 52, 0 mm³/Hubcorrect |
| Kühlerlüfter | 6 Blättercorrect |
| Length | 3.545 mmcorrect |
| Linkage category | Cat IIcorrect |
| Lüfter. bohrung | 102 mmcorrect |
| Max. drehmoment | 23, 3 kpmcorrect |
| Max.einspritzdruck | 212 barcorrect |
| Top speed | 25 odercorrect |
| Total units built | 24.339 Stückcorrect |
| Track width | 1,360correct |
| U/min geregelter drehzahlbereich | 660 biscorrect |
| U/min kraftstoffpumpe | Roto-Dieselcorrect |
| Unladen weight | 2.570 kgcorrect |
| Verdichtungsverhältnis | 16.2correct |
| Verteilereinspritzpumpe | Roto-Dieselcorrect |
Frequently asked questions
How much power does the John Deere 2030 have?
The John Deere 2030 delivers 60 hp.
What are the dimensions of the John Deere 2030?
1,970 mm × 2,440 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 36 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
