John Deere Lanz 710
Built: 1965–1967 · Series: 10er-Baureihe
More machines from model year 1965
John Deere-Lanz 310 and 710 – the 10-series from Mannheim, successor to the 0-series numbering: three to four cylinders, 23.5 to 36.8 kW
Shortly after the 0-series, John Deere-Lanz at the Mannheim plant switched to 10-series type numbers: the 310 and 710 follow the same logic as their 0-series predecessors but carry the new numbering ending in 10. The engines are three- and four-cylinder diesels. From the mid-1960s the Lanz name finally disappeared from the type designation altogether, and the Mannheim models ran from then on simply as John Deere.
Read on 3 more paragraphs
The register lists 2 versions of 23.5 to 36.8 kW from three to four cylinders of 2,490 to 3,320 cm³ at 1,950 to 2,400 rpm, unladen weights from 1,978 to 2,234 kg, lengths from 3,400 to 3,530 mm, widths from 1,580 to 1,790 mm and heights from 1,570 to 1,750 mm; one version delivers 50 hp.
Like the 0-series, the 10-series was common in West Germany on medium arable and grassland farms, with Fendt, Deutz and Eicher as direct competitors; the change in type numbers accompanied the gradual shift from the Lanz brand to the plain John Deere designation in the following years.
On a used example, what counts is the condition of clutch, gearbox and rear axle, tightness of the injection pump, rust on sheet-metal parts, and the limited parts supply for these early Mannheim models, which runs through specialist tractor restorers.
Sources: SpecCodex register, model data: John Deere-Lanz 10er-Baureihe, John Deere (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 50 hp (36.8 kW)correct |
| Rated speed | 2,400 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,320 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,530 mmcorrect |
|---|---|
| Width | 1,790 mmcorrect |
| Height | 1,750 mmcorrect |
| Wheelbase | 2,200 mmcorrect |
| Ground clearance | 500 mmcorrect |
| Unladen weight | 2,234 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 10V/3Rcorrect |
| Forward gears | 10correct |
| Reverse gears | 3correct |
| Front tyres | 6.50-16 ASFcorrect |
| Rear tyres | 11-32 AScorrect |
| Top speed | 20 km/hcorrect |
Working data
| Fuel tank capacity | 70 lcorrect |
|---|
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|---|
| Units built | 6,962correct |
Other data
| Linkage category | Cat I/IIcorrect |
|---|
Where this model stands
Power-to-weight ratio: 16.5 kW/t (37 kW / 2.2 t)
Power class: Universal (40–100 hp)
Stronger than 34% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the John Deere Lanz 710 have?
The John Deere Lanz 710 delivers 50 hp.
How much does the John Deere Lanz 710 weigh?
The unladen weight is 2,234 kg.
What engine does the John Deere Lanz 710 have?
4 cylinders, 3,320 cm³ displacement, Diesel.
How fast does the John Deere Lanz 710 go?
Top speed is 20 km/h.
What are the dimensions of the John Deere Lanz 710?
3,530 mm × 1,790 mm × 1,750 mm.
When was the John Deere Lanz 710 built?
Production years: 1965–1967.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.