John Deere Lanz 700
Built: 1963–1965 · Series: 0er-Baureihe
More machines from model year 1963
John Deere-Lanz 100 and 700 – the 0-series from Mannheim after the 1956 Lanz takeover: two to four cylinders, 13.2 to 36.8 kW
After John Deere took over Heinrich Lanz AG in 1956, tractor production at the Mannheim plant initially continued under the dual John Deere-Lanz brand; the models of the 0-series, such as the 100 and 700, carry the type numbers ending in 00 typical of these transitional years, before the range was switched to 10-series numbers shortly afterwards. The engines are two- to four-cylinder diesels. The classic Lanz Bulldog with its slow-running single-cylinder hot-bulb engine was technically outdated by this point; John Deere replaced it with new multi-cylinder direct-injection diesels, initially keeping both the name and the plant location.
Read on 3 more paragraphs
The register lists 2 versions of 13.2 to 36.8 kW (18 to 50 hp) from two to four cylinders of 1,183 to 2,705 cm³ at 2,400 to 2,500 rpm, unladen weights from 1,230 to 2,300 kg, lengths from 3,120 to 3,390 mm, widths from 1,470 to 1,650 mm and heights from 1,388 to 1,585 mm; torque on one version is 170 Nm.
The 0-series marks the transition from the Lanz Bulldog heritage to modern, multi-cylinder John Deere diesels and was common on medium and larger arable farms in West Germany, where it competed with Fendt, Deutz and Eicher.
On a used example, what counts is the condition of clutch, gearbox and rear axle, tightness of the injection pump, rust on wings and bonnet, and parts availability, which for these early John Deere-Lanz models today runs only through specialist dealers.
Sources: SpecCodex register, model data: John Deere-Lanz 0er-Baureihe, John Deere (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 50 hp (36.8 kW)correct |
| Rated speed | 2,400 rpmcorrect |
| Torque | 170 Nmcorrect |
| Cylinders | 4correct |
| Displacement | 2,705 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,390 mmcorrect |
|---|---|
| Width | 1,650 mmcorrect |
| Height | 1,585 mmcorrect |
| Wheelbase | 1,950 mmcorrect |
| Ground clearance | 385 mmcorrect |
| Unladen weight | 2,300 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 10V/3Rcorrect |
| Forward gears | 10correct |
| Reverse gears | 3correct |
| Front tyres | 6.00-16 ASFcorrect |
| Rear tyres | 11-32 AScorrect |
| Top speed | 20 km/hcorrect |
Origin and approval
| Construction | semi-frame constructioncorrect |
|---|---|
| Units built | 3,021correct |
Other data
| Linkage category | Cat I/IIcorrect |
|---|
Where this model stands
Power-to-weight ratio: 16 kW/t (37 kW / 2.3 t)
Power class: Universal (40–100 hp)
Stronger than 34% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the John Deere Lanz 700 have?
The John Deere Lanz 700 delivers 50 hp.
How much does the John Deere Lanz 700 weigh?
The unladen weight is 2,300 kg.
What engine does the John Deere Lanz 700 have?
4 cylinders, 2,705 cm³ displacement, Diesel.
How fast does the John Deere Lanz 700 go?
Top speed is 20 km/h.
What are the dimensions of the John Deere Lanz 700?
3,390 mm × 1,650 mm × 1,585 mm.
When was the John Deere Lanz 700 built?
Production years: 1963–1965.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.