John Deere 9760 STS
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The John Deere 9760 STS is a Combines made by John Deere. Under the bonnet works a six-cylinder engine displacing 8.1 litres, producing 253 kW. Rated power is reached at 2,200 rpm.
Within the range, rated power spans from 133 to 328 kW; with 253 kW, the 9760 STS sits in the upper third. Directly alongside are the 9670 STS with 227 kW below and the 9770 STS with 268 kW above.
Technical data
Engine
| Engine make | 2,240correct |
|---|---|
| Power | 253 kWcorrect |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 8,100.1 cm³correct |
Working data
| Fuel tank capacity | 945.2 lcorrect |
|---|
Frequently asked questions
How much power does the John Deere 9760 STS have?
The John Deere 9760 STS delivers 253 kW.
What engine does the John Deere 9760 STS have?
6 cylinders, 8,100 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.