John Deere 850C Crawler
Series: 850C
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | 400 Seriescorrect |
|---|---|
| Power | 134.2 kWcorrect |
| Rated speed | 1,800 rpmcorrect |
| Torque | 783.7correct |
| Speed at max. torque | 1,300 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 7,636.4 cm³correct |
| Aspiration | turbochargedcorrect |
| Coolant capacity | 128.7 lcorrect |
Dimensions and weights
| Unladen weight | 18,163.2 kgcorrect |
|---|
Drivetrain and chassis
| Gearbox type | hydrostatic transmissioncorrect |
|---|
Working data
| Fuel tank capacity | 348.3 lcorrect |
|---|
Where this model stands
Power-to-weight ratio: 7.4 kW/t (134 kW / 18.2 t)
Stronger than 50% of the mining equipment in the register — out of 945 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the John Deere 850C have?
The John Deere 850C delivers 134 kW.
How much does the John Deere 850C weigh?
The unladen weight is 18,163 kg.
What engine does the John Deere 850C have?
6 cylinders, 7,636 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Dump truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.