Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › John Deere › 6000 series › 6300

John Deere 6300 – specifications

Built: 1992–1997 · Series: 6000er

Data for the version built 1992–1997 · Data origin: Official register, Reference work (Wikipedia/Wikibooks) · sources

More machines from model year 1992

Source: deere.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 6300 from John Deere is part of the 6000er series. Production: 1992–1997. The engine delivers 90 hp, has 4 cylinders, with a displacement of 3,920 cm³. Torque is 364 Nm. The unladen weight is 3,750 kg. The tank holds 160 litres. Transmission: SyncroPlus / PowrQuad. The linkage is category I/II. The PTO runs at 540/1000 rpm. The 6000er series covers 7 models and was built 1992–1997. Rated output within it ranges from 75 to 130 hp; the 6300 sits in the lower part of that range with 90 hp. Its immediate neighbours are the 6200 below it with 84 hp and the 6506 above it with 105 hp. Unladen weight within it ranges from 3,750 to 5,800 kg; here the 6300 sits at the bottom of that range with 3,750 kg. 2622 John Deere models across 140 series are on record.

John Deere 6000 Series – First Mid-Range Built at the Mannheim Plant, 1992 to 1997: four- and six-cylinder diesels up to 77.3 kW (105 hp), 3,920 to 6,788 cm³ displacement

With the 6000 series, John Deere brought a new mid-range generation built at its Mannheim plant to the European market in 1992, produced until 1997. According to the register, output of one recorded model reaches 77.3 kW, or 105 hp, using four- and six-cylinder engines with displacement from 3,920 to 6,788 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 3,750 to 5,800 kg, wheelbase of one recorded model is 2,650 mm, and rated speed is 30 km/h. The model range spanned from the 6100 to the 6900, covering a wide power spectrum within a single series.

Compared with its predecessors, the 6000 series introduced a revised, more ergonomic cab and was succeeded by the 6010 series in 1997. For a used model, check the gearbox variant, as PowrQuad and Synchro versions were offered in parallel.

With a rated output of 77.3 kW, the 6000 series already fell within three-point category II under ISO 730, and the PTO ran two-speed at 540 and 1,000 rpm, as was standard for tractors of this power class from the 1980s. Parts for the 6000 series remain well available today through John Deere's dense dealer network. PowrQuad transmissions allow shifting within certain groups without using the clutch under load, while the simpler Synchro version still requires the clutch for each gear change; this makes PowrQuad models more comfortable under frequent load changes but more demanding to maintain.

Sources: SpecCodex register, model data: John Deere 6000er, John Deere

Versions of this model in the register

Each row is a separate entry with its own data. The figures on this page belong to the row marked ●.

VersionBuiltkWEU type approvalOrigin
● 6300 1992–1997——Official register
6300 —31,3—Directory data

Technical data

Engine

EngineJohn Deere 4.039 TL-006correct
Power90 hpcorrect
Torque364 Nmcorrect
Cylinders4correct
Displacement3,920 cm³correct

Dimensions and weights

Unladen weight3,750 kgcorrect

Drivetrain and chassis

GearboxSyncroPlus / PowrQuadcorrect

Working data

Fuel tank capacity160 lcorrect

Other data

Linkage categoryCat I/IIcorrect
PTO speed540/1000 rpmcorrect

Area: Machines

Where this model stands

Power-to-weight ratio: 17.6 kW/t (66 kW / 3.8 t)

Power class: Universal (40–100 hp)

Stronger than 61% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 6300 have?

The John Deere 6300 delivers 90 hp.

How much does the John Deere 6300 weigh?

The unladen weight is 3,750 kg.

What engine does the John Deere 6300 have?

4 cylinders, 3,920 cm³ displacement.

When was the John Deere 6300 built?

Production years: 1992–1997.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​​​​​​​⁠‌‌‍‌‌⁠‍​​‌​‍

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare