Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › John Deere › 5115R

John Deere 5115R

Series: 5R

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 5115R, John Deere offers a model from the 5R series. The engine delivers 115 hp (85 kW), has 4 cylinders, with a displacement of 4,500 cm³. Rated speed is 2,200 rpm. The machine is 3,653 mm long, 2,150 mm wide and 2,777 mm high. The unladen weight is 4,300 kg. The wheelbase measures 2,250 mm. Lifting capacity is 5,054 kg. The engine is water-cooled. The gross vehicle weight is 8,600 kg. The fuel is diesel. Rated output across the John Deere range ranges from 10.6 to 577.9 hp; the 5115R sits in the lower part of that range with 115 hp. Its immediate neighbours are the 7220 below it with 111.5 hp and the 3650 A above it with 116 hp. Unladen weight across the John Deere range ranges from 989 to 103,651.8 kg; here the 5115R sits at the bottom of that range with 4,300 kg. 2620 John Deere models across 140 series are on record.

John Deere 5R, Model 5115R: a four-cylinder engine of 4,500 cc, 85 kW, an 8,600 kg permissible gross weight and a 5,054 kg hydraulic lift capacity for loader and implement work

The 5115R belongs to John Deere's 5R line, a more powerful offshoot of the well-known 5 Series general-purpose tractors. Within that range, the R denotes a higher equipment tier with more power than the simpler standard versions of the 5 Series.

Read on 3 more paragraphs

The four-cylinder engine of 4,500 cc produces 85 kW (115 hp) at 2,200 rpm. With a permissible gross weight of 8,600 kg and an unladen weight of 4,300 kg, around 4,300 kg of payload remains. The hydraulics lift up to 5,054 kg, a figure that points to a strong front hydraulic system or a rear lift built for heavy implements.

General-purpose tractors in this power class with high lift capacity are built for work with front loaders, heavy bale grips or large implements on livestock and mixed farms. With a wheelbase of 2,250 mm and a width of 2,150 mm, the 5115R offers the stability such lifting work demands.

Buying a used 5115R means paying particular attention to the high-capacity hydraulics: the cylinders, seals and pump should be checked for lost performance, especially if the tractor spent time working with a front loader. The clutch, front axle bearings and steering joints are also wear points given this weight, and worth asking about specifically when viewing a machine. Parts are readily available through John Deere's wide dealer network across Europe.

Sources: SpecCodex-Register: Kennwerte des Modells 5115R

Technical data

Engine

Fueldieselcorrect
Power115 hp (85 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement4,500 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,653 mmcorrect
Width2,150 mmcorrect
Height2,777 mm (maximum)correct
Wheelbase2,250 mmcorrect
Unladen weight4,300 kgcorrect
Gross vehicle weight8,600 kgcorrect

Working data

Lifting capacity5,054 kgcorrect

Where this model stands

Power-to-weight ratio: 19.8 kW/t (85 kW / 4.3 t)

Power class: Large (100–180 hp)

Stronger than 73% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 5115R have?

The John Deere 5115R delivers 115 hp.

How much does the John Deere 5115R weigh?

The unladen weight is 4,300 kg.

What is the gross vehicle weight of the John Deere 5115R?

8,600 kg.

What engine does the John Deere 5115R have?

4 cylinders, 4,500 cm³ displacement, Diesel.

How much does the rear linkage of the John Deere 5115R lift?

The rear linkage lifts 5,054 kg.

What are the dimensions of the John Deere 5115R?

3,653 mm × 2,150 mm × 2,777 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1] [2] [3] [4]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare