John Deere 468 Silage Special – specifications
Series: Other models
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| PTO power required | 55.9 kWcorrect |
|---|
Dimensions and weights
| Length | 3,710 mmcorrect |
|---|---|
| Height | 2,790 mmcorrect |
| Unladen weight | 2,057 kgcorrect |
Working data
| Number of tines | 96correct |
|---|---|
| Twine rolls | 8correct |
| Number of knife bars | 4correct |
| Twine tying | electriccorrect |
| Number of belts | 6correct |
| Belt width | 180.3 mmcorrect |
| Max. bale weight | 998 kgcorrect |
Other data
| Lift type | crankcorrect |
|---|
Frequently asked questions
How much does the John Deere 468 Silage Special weigh?
The unladen weight is 2,057 kg.
What are the dimensions of the John Deere 468 Silage Special?
3,710 mm × 2,790 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Round baler in 3D section
Turn the model, look inside and click an assembly — each one is explained.
