John Deere 190E

Series: John Deere Midi Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 190E from John Deere is part of the John Deere Midi Excavator series. The engine delivers 60.8 hp (41 kW), with a displacement of 3,916.5 cm³. Torque is 207.4 Nm. The unladen weight is 7,393.6 kg. Ground clearance is 426.7 mm. The tank holds 135.1 litres. The pump delivers 23.5 l/min. The hydraulic tank holds 66.2 litres. Working pressure is 259.9 bar. The cooling system holds 44.7 litres. The oil fill is 34.1 litres. The electrical system runs on 24 V. The engine fitted is the 190E / 4039D. The John Deere Midi Excavator series covers 12 models. Rated output within it ranges from 38.5 to 60.8 hp; the 190E sits at the top of that range with 60.8 hp. Its immediate neighbours are the 50C ZTS below it with 42.1 hp. 2153 John Deere models across 96 series are on record. The model is listed under Excavators & compaction. 15 verified figures from 1 source are on file.

Technical data

Engine

Engine model190E / 4039Dcorrect
Power60.8 hp (41 kW)correct
Torque207.4correct
Displacement3,916.5 cm³correct
Coolant capacity44.7 lcorrect
Engine oil capacity34.1 lcorrect

Dimensions and weights

Ground clearance426.7correct
Unladen weight7,393.6 kgcorrect

Drivetrain and chassis

System voltage24 Vcorrect

Working data

Pump flow23.5 l/mincorrect
Hydraulic oil capacity66.2 lcorrect
Hydraulic pressure259.9 barcorrect
Fuel tank capacity135.1 lcorrect

Other data

Height2,590.8correct

Where this model stands

Power-to-weight ratio: 5.5 kW/t (41 kW / 7.4 t)

Stronger than 11% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 190E have?

The John Deere 190E delivers 60.8 hp.

How much does the John Deere 190E weigh?

The unladen weight is 7,394 kg.

What engine does the John Deere 190E have?

3,916 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare