Start › Excavators & compaction › John Deere › 60D

John Deere 60D

Series: John Deere Midi Excavator

Source: https://www.lectura-specs.com/en/model/construction-machiner

The John Deere 60D is a model in the John Deere Midi Excavator series. The engine delivers 40.3 kW, has 4 cylinders, with a displacement of 3,179.1 cm³. Rated speed is 2,000 rpm. The unladen weight is 6,193 kg. Ground clearance is 341.4 mm. The tank holds 120.4 litres. The pump delivers 144.2 l/min. The hydraulic tank holds 41.3 litres. The oil fill is 11.4 litres. The electrical system runs on 12 V. The engine fitted is the 4TNV98. Tier IIII certified. The John Deere Midi Excavator series covers 12 models. Rated output within it ranges from 28.3 to 41 kW; the 60D sits at the top of that range with 40.3 kW. Its immediate neighbours are the 80C below it with 38.8 kW and the 190E above it with 41 kW. 2153 John Deere models across 96 series are on record. The model is listed under Excavators & compaction. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine model	4TNV98, Tier IIII certifiedcorrect
Power	40.3 kWcorrect
Rated speed	2,000 rpmcorrect
Cylinders	4correct
Displacement	3,179.1 cm³correct
Engine oil capacity	11.4 lcorrect

Dimensions and weights

Ground clearance	341.4correct
Unladen weight	6,193 kgcorrect

Drivetrain and chassis

System voltage	12 Vcorrect

Working data

Pump flow	144.2 l/mincorrect
Hydraulic oil capacity	41.3 lcorrect
Fuel tank capacity	120.4 lcorrect

Other data

Height	2,560.3correct

Where this model stands

Power-to-weight ratio: 6.5 kW/t (40 kW / 6.2 t)

Stronger than 8% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 60D have?

The John Deere 60D delivers 40.3 kW.

How much does the John Deere 60D weigh?

The unladen weight is 6,193 kg.

What engine does the John Deere 60D have?

4 cylinders, 3,179 cm³ displacement.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →