John Deere 1450 CWS
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The John Deere 1450 CWS is a Combines from John Deere. The engine is rated at 133 kW. Rated speed is 2,400 rpm.
Within the range, rated power spans from 133 to 328 kW; with 133 kW, the 1450 CWS sits at the bottom end. The next one up is the 1550 CWS with 165 kW.
John Deere combine harvesters – other models: from the 1450 CWS through the STS to the WTS range from East Moline and Zweibrücken, six-cylinders of 133 to 328 kW
This page gathers the John Deere combine harvesters the register could not assign to a named range – from the older 1450 CWS and 1550 CWS to the STS and WTS combines of the 9500 to 9800 series. John Deere builds its combines in East Moline, Illinois, and, for the European market, in Zweibrücken, Germany. The STS technology introduced in 1999 replaced the classic straw walkers with a single rotor (Single Tine Separator) for threshing and separation; WTS marks the version with wider track undercarriage for softer ground.
Read on 3 more paragraphs
The register lists here 11 versions with 133 to 328.1 kW from six-cylinders of 6,800.6 to 13,501.3 cm³, fitted among others with the PowerTech engines 6068H and 6081H, at rated speeds of 2,200 to 2,400 rpm.
The STS range was among the best-selling big combines of Europe and North America for over two decades, and its rotor technology became the basis of the later S and T series; the WTS versions additionally opened up wet and sloping ground. In Europe John Deere sold the STS combines through a dealer network reaching both large arable farms and contracting businesses.
On used combines, the condition of the threshing and separating rotor, sieves and chopper, header mounting and hydraulics count, on WTS models additionally the track undercarriage, plus operating hours and service history; parts run through the Deere network.
Sources: Kennwerte der Modelle John Deere Mähdrescher (weitere Modelle), John Deere (Hersteller)
Technical data
Engine
| Engine model | 6068Hcorrect |
|---|---|
| Power | 133 kWcorrect |
| Rated speed | 2,400 rpmcorrect |
Drivetrain and chassis
| Gearbox type | 3 speedcorrect |
|---|
Working data
| Fuel tank capacity | 470.1 lcorrect |
|---|
More machines with this engine (John Deere 6068H, 65)
Frequently asked questions
How much power does the John Deere 1450 CWS have?
The John Deere 1450 CWS delivers 133 kW.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.