Jodmet JET – specifications
Built: 2017-2020 · Series: Other models
The Jodmet-JET is a vehicle built by Jodmet. Production: 2017-2020. The vehicle is 7,350 mm long and 2,550 mm wide. The unladen weight is 750 kg. The wheelbase measures 780 mm. Top speed is 100 km/h. The gross vehicle weight is 3,500 kg. The vehicle runs on 4 wheels. Unladen weight within this group ranges from 85 to 84,800 kg; the JODMET-JET sits at the bottom of that range with 750 kg. Its immediate neighbours are the 120002A below it with 749 kg and the ADRIA 450 L above it with 751 kg. Gross vehicle weight within this group ranges from 470 to 722,500 kg; here the JODMET-JET sits at the bottom of that range with 3,500 kg.
Data for the version built 2017-2020 · Data origin: Official register · sources
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Jodmet-Jet – EU category O2 trailer, built 2017 to 2020: 3,500 kg gross weight, 2,750 kg payload, 7.35 m length, 2.55 m width.
With a gross weight of 3,500 kg, the Jodmet-Jet belongs to the EU trailer category O2, covering trailers between 750 kg and 3,500 kg. The model was built between 2017 and 2020.
Read on 3 more paragraphs
With an unladen weight of 750 kg, the payload comes to 2,750 kg, a full three quarters of the gross weight, a very favourable ratio for a simple utility trailer. At 7.35 m long and 2.55 m wide, the Jodmet-Jet offers a generous load area; its four wheels stand on two axles with 780 mm spacing between the axles of the tandem set.
Category O2 trailers usually run with an overrun brake, acting purely mechanically through the sliding drawbar on both axles. Towing behind a car only requires licence category B, as long as the combined weight does not exceed 3,500 kg; heavier towing vehicles require category BE. The tandem axle set spreads the wheel load and stabilises the light trailer under full load, a simple and robust layout typical of general-purpose trailers in this weight class.
When buying a used trailer from the 2017 to 2020 build years with a tandem axle set, uneven wear between the two axles is worth checking: uneven tyre wear points to a misaligned axle mount. The overrun mechanism must slide smoothly in and out, and the checklist should also cover brake cables and linings and the frame along its full length for rust and cracks, as well as the lighting and tyre tread depth. The floor covering is also worth checking for splits or rot where cargo has rubbed against it.
Sources: SpecCodex-Register: Kennwerte des Modells Jodmet-Jet, Zulassungsdaten RDW (Niederlande)
Technical data
Dimensions and weights
| Length | 7,350 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Coupling-to-axle distance | 780 mmcorrect |
| Unladen weight | 750 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.