Technical register for agricultural, construction and commercial machinery · sourced data
StartAerial work platformsJLG › 600A Narrow

JLG 600A Narrow

Series: JLG Boom Lift

The photo shows the 450A 2WD from the same series. Source: https://www.lectura-specs.fr/fr/modele/nacelles/nacelles-a-b

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 600A Narrow from JLG is part of the JLG Boom Lift series. The engine delivers 49.7 hp (36.5 kW). The unladen weight is 10,931 kg. The wheelbase measures 2,441.4 mm. Ground clearance is 200.2 mm. Top speed is 6.9 km/h. The tank holds 113.9 litres. The fuel is diesel. The hydraulic tank holds 115.8 litres. The engine fitted is the D2011L04. Tyre size: 14x17,5. The JLG Boom Lift series covers 31 models. Rated output within it ranges from 6.8 to 88.4 hp; the 600A Narrow sits in the middle of that range with 49.7 hp. Its immediate neighbours are the 460SJ below it with 48.8 hp and the 600S 2WD above it with 65.3 hp. 160 JLG models across 12 series are on record. The model is listed under Cranes & access platforms. 12 verified figures from 1 source are on file.

JLG Boom Lifts: What S, SJ and AJ Mean After the Number

On JLG models like the 400S, 460SJ or 740AJ, the number roughly tracks platform height in feet, while the letter code describes the boom type: "S" marks a straight telescopic boom, "SJ" a telescopic boom with an added basket jib, and "AJ" an articulating boom with a jib. JLG itself describes telescopic booms as reach specialists for distance and open ground, while articulating booms trade some reach for a more compact footprint around obstacles.

Read on 4 more paragraphs

Models with a leading "E", such as the E26MJ, E33MJ or E600J in this dataset, mark electric-drive lifts — as opposed to diesel- or gas-powered models like the 400S or 460SJ.

Platform capacity holds steady at 230 kg across the recorded SpecCodex data, matching comparable lifts from other manufacturers. Several models also share a recorded displacement of 2,900 cm³, pointing to one common engine fitted across multiple boom sizes.

When buying used, check for play in the telescoping boom's slide pads, inspect hydraulic hoses running through the boom, test the emergency-lowering system, and — on electric models — check battery condition. Hours on the clock and the service log deserve a look too.

In short: the number is a rough platform height, S/SJ/AJ describes the boom type, and a leading E marks electric drive.

Sources: Kennwerte der Modelle JLG Boom Lift, — JLG: Straight vs. Articulating Boom Lift, — JLG: 800S Telescopic Boom Lift Produktseite

Technical data

Engine

Engine modelD2011L04correct
Fueldieselcorrect
Power49.7 hp (36.5 kW)correct

Dimensions and weights

Length8,050 mmcorrect
Width2,130.6correct
Wheelbase2,441.4correct
Ground clearance200.2correct
Unladen weight10,931 kgcorrect

Drivetrain and chassis

Tyre size14x17.5correct
Top speed6.9 km/hcorrect
Turning radius3,400 mmcorrect

Working data

Hydraulic oil capacity115.8 lcorrect
Fuel tank capacity113.9 lcorrect

More machines with this engine (D2011L04, 7)

Where this model stands

Power-to-weight ratio: 3.3 kW/t (36 kW / 10.9 t)

Stronger than 53% of the aerial work platforms in the register — out of 205 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the JLG 600A Narrow have?

The JLG 600A Narrow delivers 49.7 hp.

How much does the JLG 600A Narrow weigh?

The unladen weight is 10,931 kg.

How fast does the JLG 600A Narrow go?

Top speed is 6.9 km/h.

What are the dimensions of the JLG 600A Narrow?

8,050 mm × 2,131 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Telescopic platform in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare