Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Electric motors › Jlem › JM3 › JM3 132M-2

Jlem JM3 132M-2

Series: JM3

The photo shows the JM3 160L-2-15.00kW380 from the same series. Source: weg.net

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The JM3 132M-2 belongs to the JM3 series from Jlem. The rated output is 7.5 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 415 V. The housing is frame size 132 M in foot-mounted form. The protection class is IP55. The efficiency is 90.1 per cent at full load, 90.7 per cent at 75 per cent load and 90 per cent at half load. The mounting arrangement to IEC 60034-7 is B34. The motor is built in China. The figures come from the Australian MEPS register under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). The JM3 series covers 13 models. Rated output within it ranges from 3 to 37 kW; the JM3 132M-2 sits at the bottom of that range with 7.5 kW. Its immediate neighbours are the JM3 132S1-2-5.50kW380 below it with 5.5 kW and the JM3 160L1-2 above it with 11 kW. 18 Jlem models across 2 series are on record.

JLEM JM3 – other models: the collective page of MEPS-registered three-phase motors outside the named versions, exclusively two-pole, frame sizes 132 to 200, 3 to 37 kW, made in China

This page gathers the JM3-range three-phase motors from JLEM the Australian energy-efficiency register could not assign to a named model. All 13 motors are two-pole and come from manufacture in China. Model designations such as JM3 160L-2-15.00kW380 give the IEC frame size, the pole count and, in the full spelling, also the rated output and voltage directly in the name.

Read on 3 more paragraphs

The register lists here 13 versions with 3 to 37 kW, exclusively two-pole, full-load efficiencies from 87.13 to 93.47% and at 75% load from 87.78 to 93.72%. Frame sizes run from 132 to 200, protection is consistently IP55, voltage lies between 380 and 415 V. Testing mostly followed AS/NZS 1359.5:2004, with test method A; none of the 13 motors reaches a documented High Efficiency classification.

With its exclusively two-pole power band of 3 to 37 kW, JLEM covers the mid-range power segment of high-speed drives such as centrifugal pumps and compressors need, competing with numerous other Chinese standard-motor makers.

When buying used, bearing condition and a checked insulation resistance of the winding, the condition of shaft, key and fan cover, a legible nameplate with frame size, rated output and voltage, and, on the motors mostly mounted in B35, the condition of the foot bracket all matter; spares are available through the general electric-motor trade.

Sources: SpecCodex register, model data: JLEM Jm3 (weitere Modelle, MEPS-Registrierungen)

Technical data

Engine

Rated output7.5 kWcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles2correct
Protection classIP55correct
Frame size132 M (foot)correct
Mounting (IEC 60034-7)B34correct
Efficiency at full load90.11 %correct
Efficiency at 75 % load90.65 %correct
Efficiency at half load89.95 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Jlem JM3 132M-2 have?

The Jlem JM3 132M-2 delivers 7.5 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

JM3 132S1-2-3.00kW380

JM3 132S1-2-5.50kW380

JM3 132S1-204.00kW380

JM3 160L-2-15.00kW380

JM3 160L-2-18.50kW380

JM3 160L1-2

JM3 160L2-2

JM3 160M-2-11.00kW380

JM3 160M-2-7.50kW380

JM3 180M-2-22.00kW380

JM3 200L1-2-30.00kW380

JM3 200L2-2-37.00kW380

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare