Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › JI Case › Crossmotor-Baureihe › 15-27

JI Case 15-27

Built: 1919–1924 · Series: Crossmotor-Baureihe

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 15-27 from JI Case is part of the Crossmotor series. Production: 1919–1924. The engine delivers 27.4 hp (20.2 kW), has 4 cylinders, with a displacement of 6,255 cm³. Rated speed is 900 rpm. The machine is 3,226 mm long, 1,829 mm wide and 1,727 mm high. The unladen weight is 2,880 kg. The wheelbase measures 1,943 mm. Top speed is 4.83 km/h. Transmission: 2 V/1 R. The engine is water-cooled. Tyres: front 32" x 6", rear 52" x 14". The fuel is Benzin/Kerosin. The bore measures 114.3 mm. The stroke is 152.4 mm. Construction: cast-frame construction. Around 17.628 units were built. The Crossmotor-Baureihe series covers 7 models. Rated output within it ranges from 18.2 to 73 hp; the 15-27 sits in the lower part of that range with 27.4 hp. Its immediate neighbours are the 12-20 below it with 20.3 hp and the 18-32 above it with 32.4 hp. Unladen weight within it ranges from 1,710 to 9,616 kg; here the 15-27 sits at the bottom of that range with 2,880 kg. 121 JI Case models across 13 series are on record.

J.I. Case Crossmotor series (1915–1929) – the tractors with transversely mounted engine from Racine: 8-18 to 40-72, the numbers as drawbar and belt power in hp, four-cylinders of 3.9 to 20.2 litres, kerosene and petrol

The Crossmotor tractors are the machines with which J.I. Case of Racine, Wisconsin, moved from steam-engine building into tractor building: from 1915 the company built tractors whose four-cylinder engine lay in the frame transversely to the direction of travel – Crossmotor – which simplified the drive to belt pulley and gearbox, and kept the layout until 1929, when the models C and L with longitudinal engine followed. The type logic follows the convention of the time: the two numbers give drawbar and belt power in hp – 8-18 eight hp at the drawbar and eighteen at the belt pulley, 10-18, 12-20, 15-27, 18-32, 22-40 and 25-45 the mid-range, 40-72 the giant of the range with a four-cylinder of 20.2 litres built in only a few units. The engines ran on kerosene and were started on petrol, at rated speeds below 1,000 rpm.

Read on 3 more paragraphs

The register lists 7 versions with 13.4 to 53.7 kW from four-cylinders of 3,866 to 20,181 cm³, unladen weights from 1,710 to 9,616 kg, lengths from 2,769 to 5,080 mm, widths from 1,473 to 2,667 mm and heights from 1,410 to 2,794 mm.

The Crossmotor models are the most sought-after Case collectors' pieces: the 40-72 was the most powerful tractor of the Nebraska tests of its time, the 12-20 and 15-27 the best sellers with which Case belonged to the three big American makers in the 1920s.

Used, they are museum pieces: completeness, originality of engine, carburettor and magneto, the condition of the steel wheels or conversion to rubber and provenance count; parts are reproduced.

Sources: SpecCodex register, model data: J.I. Case Crossmotor-Baureihe, J. I. Case Company (Wikipedia)

Technical data

Engine

FuelBenzin/Kerosincorrect
Power27.4 hp (20.2 kW)correct
Rated speed900 rpmcorrect
Cylinders4correct
Displacement6,255 cm³correct
Bore114.3 mmcorrect
Stroke152.4 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,226 mmcorrect
Width1,829 mmcorrect
Height1,727 mmcorrect
Wheelbase1,943 mmcorrect
Unladen weight2,880 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox2 V/1 Rcorrect
Front tyres32" x 6"correct
Rear tyres52" x 14"correct
Top speed4.83 km/hcorrect

Origin and approval

Constructioncast-frame constructioncorrect
Units built17,628correct

Where this model stands

Power-to-weight ratio: 7 kW/t (20 kW / 2.9 t)

Power class: Compact (< 40 hp)

Stronger than 15% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the JI Case 15-27 have?

The JI Case 15-27 delivers 27.4 hp.

How much does the JI Case 15-27 weigh?

The unladen weight is 2,880 kg.

What engine does the JI Case 15-27 have?

4 cylinders, 6,255 cm³ displacement, Benzin/Kerosin.

What are the dimensions of the JI Case 15-27?

3,226 mm × 1,829 mm × 1,727 mm.

When was the JI Case 15-27 built?

Production years: 1919–1924.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare