JI Case CF-250
Built: 1962–1966 · Series: CF-Serie
More machines from model year 1962
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
J.I. Case CF Series – CF-250, CF-350 and CF-400: four-cylinder diesel tractors from 18.4 to 29.4 kW, 1,816 cm³ displacement and 1,600 to 1,790 kg operating weight from Case
J.I. Case is an agricultural machinery maker with roots in Racine, Wisconsin, whose name still stands for rugged farm tractors. Under the designation CF Series, the register lists three versions whose type designations CF-250, CF-350 and CF-400 follow a rising three-digit numbering pattern that marks the size class within the range.
Read on 3 more paragraphs
The register lists 3 versions with 18.4 to 29.4 kW rated output at 2,200 to 2,500 rpm. All three models share a four-cylinder diesel engine with 1,816 cm³ displacement. Operating weights range from 1,600 to 1,790 kg, lengths from 2,990 to 3,210 mm with a constant width of 1,640 mm and heights from 1,590 to 1,620 mm.
With this power band, the CF Series counts among the compact utility tractors designed for smaller and medium-sized holdings as well as speciality crops with narrower row spacing. The unchanged engine capacity across all three size classes points to a shared technical base with staged power output.
When buying used, it is worth checking the mechanical injection pump, the condition of the clutch and power take-off, and the hydraulic hoses and pump, which tend to age first on compact tractors of this weight class. Corrosion on wings and stub axles and the function of the brakes should be checked before purchase; wear parts are generally available through the Case dealer network.
Sources: SpecCodex register, model data: J.I. Case CF-Serie
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 25 hp (18.4 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 1,816 cm³correct |
| Bore | 85 mmcorrect |
| Stroke | 80 mmcorrect |
| Compression ratio | 21correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 2,990 mmcorrect |
|---|---|
| Width | 1,640 mmcorrect |
| Height | 1,590 mmcorrect |
| Wheelbase | 1,751 mmcorrect |
| Ground clearance | 480 mmcorrect |
| Unladen weight | 1,600 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 8 V/4 Rcorrect |
| Front tyres | 5.00-15 ASFcorrect |
| Rear tyres | 10-28 AScorrect |
| Top speed | 20 km/hcorrect |
Where this model stands
Power-to-weight ratio: 11.5 kW/t (18 kW / 1.6 t)
Power class: Compact (< 40 hp)
Stronger than 12% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the JI Case CF-250 have?
The JI Case CF-250 delivers 25 hp.
How much does the JI Case CF-250 weigh?
The unladen weight is 1,600 kg.
What engine does the JI Case CF-250 have?
4 cylinders, 1,816 cm³ displacement, Diesel.
How fast does the JI Case CF-250 go?
Top speed is 20 km/h.
What are the dimensions of the JI Case CF-250?
2,990 mm × 1,640 mm × 1,590 mm.
When was the JI Case CF-250 built?
Production years: 1962–1966.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.