JCB TM320 Con – specifications
Series: Other models
Build year not documented · Data origin: Manufacturer information · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The JCB TM320 Con is the construction version of the TM320 telescopic wheel loader; Con stands for Construction. It is aimed at building contractors, recycling firms and builders' merchants who on sites and stockyards must both load bulk material and lift pallets and pipes. The combination of wheel loader kinematics and telescopic boom saves swapping between two machines.
In use it loads trucks with bucket or fork, places components on scaffolds and moves material over fences and obstacles. Articulated steering eases manoeuvring on tight areas. Compared with the Agri variant, tyres and attachments for building-site ground come to the fore instead of feed and bale tools. The number 320 names the size class; the type designation contains no measured values. Lift capacity, engine and operating weight are taken from the data sheet of the specific version.
JCB telehandlers – other models: from the 5204 to the 560-80 Industry from Rocester, Agri, Industry and Con versions plus the TM compact-loader range
This page gathers the JCB telehandlers the register could not assign to a named range: from compact farmyard models such as the 5204 to heavy-duty models such as the 560-80 Industry. JCB builds its telehandlers – the brand decisively shaped this vehicle category with the first Loadall in 1977 – at its home plant in Rocester in the English county of Staffordshire. The suffixes in the type designation sort the models by field of use: Agri marks the agricultural version, Industry or Ind the industrial version, Con the construction version; TM is a separate range of compact wheeled and articulated loaders with a telescopic boom.
Read on 3 more paragraphs
The register lists here 32 versions, from simple farmyard loaders to high-output telehandlers for agriculture, industry and construction, as reflected in the model designations from 514 to 560 and the TM range from TM110 to TM420.
Telehandlers of this type are the most versatile lifting vehicles on farms, yards and building sites: a single machine replaces a yard loader, forklift and, in part, a crane, because the telescopic boom reaches both upward and forward; JCB ranks among the world's leading makers here alongside Manitou and Merlo.
On used examples, the condition of the telescopic boom and its slide pads, the tightness of the hydraulic cylinders, tyre and brake wear, the function of the attachment lock, and rust on the frame all matter; spare parts and servicing run through the JCB dealer network.
Sources: SpecCodex register, model data: JCB Teleskoplader (weitere Modelle), JCB (manufacturer)
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Manufacturer documentation, jcb.com (retrieved August 2026) · Data sources and cross-checks
Telehandler in 3D section
Turn the model, look inside and click an assembly — each one is explained.
