JCB A45EH – specifications
Series: Other models
Build year not documented · Data origin: Manufacturer information · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The JCB A45EH belongs to the aerial work platforms with which JCB entered the access equipment market. In this scheme the letter A stands for the articulated boom lift, where a knuckle boom carries the basket to the work position even over obstacles. The E and H in the name suggest an electric drive in a hybrid layout; the number 45 is a size class and not an engine rating here.
Articulated platforms of this kind are used for maintenance and installation work in industrial halls, on facades, in roofing and steel erection, and in plant upkeep. Compared with telescopic booms they gain from the basket's ability to reach around obstacles but lose horizontal reach at the same working height. Anyone matching the machine for a quotation or a parts order should use the serial number and rating plate, since equipment and drive can differ within the type.
JCB – other aerial platforms: the collective page of cranes and work platforms outside the named ranges, the A45E/A45EH and A60E/A60EH and the S2632E to S4550E from Rocester
This page gathers the JCB machines in the cranes and aerial-platforms category the register could not assign to a named range: the A45E, A45EH, A60E and A60EH models and the S2632E, S3246E and S4550E. JCB is based in Rocester in Staffordshire, England, and alongside its well-known backhoe-loader range also builds aerial work platforms for indoor and outdoor use; on these machines, the number in the type designation gives the approximate working height, and the E suffix the electric version. Such electrically driven work platforms complement JCB's large excavator and loader programme with an area where zero emissions and low noise matter more than off-road capability.
Read on 3 more paragraphs
The register lists here 7 versions with weights from 2,062 to 3,366 kg and lift capacities from 550 to 705 kg.
Such work platforms take on maintenance, installation and upkeep work at height, where scaffolding would be too costly and a ladder too unsafe; the electrically driven versions are used mainly indoors, in warehouses and on sensitive floors, where exhaust fumes and surface damage must be avoided. Equipment-rental firms form the largest group of buyers, since work platforms are often needed only for individual projects and are then re-rented elsewhere.
On used work platforms of this kind, operating hours and the condition of the battery or drive, the function of the lift mechanism and the safety cut-outs, the condition of the tyres and scissor arms, and a valid inspection sticker all matter; spare parts and service run through the JCB dealer network.
Sources: SpecCodex register, model data: JCB Krane (weitere Modelle), JCB (manufacturer)
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Manufacturer documentation, jcb.com (retrieved August 2026) · Data sources and cross-checks
Mobile crane in 3D section
Turn the model, look inside and click an assembly — each one is explained.
