Iveco/romcar 70C18
Built: 2023 · Series: Other models
More machines from model year 2023
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco 70C18 – three-axle chassis on an Iveco Daily base, EU class N2: 3.0-litre four-cylinder engine, 7,200 kg gross weight and 4,100 mm wheelbase
This vehicle is based on an Iveco Daily chassis in the heavy 70-class weight bracket fitted with a third axle, as used by independent bodybuilders for compact vehicles with a high payload. The third axle allows a high payload at a comparatively short overall length, for example for workshop, transport or municipal bodies.
Read on 3 more paragraphs
For the 70C18 the register lists a four-cylinder engine with a displacement of 2,998 cc. Kerb weight is 4,205 kg, gross vehicle weight 7,200 kg. The vehicle is 6,700 mm long, 2,350 mm wide and has a wheelbase of 4,100 mm, carried on six wheels. The design top speed is limited to 90 km/h.
At 7,200 kg gross weight the vehicle falls into EU vehicle class N2 for medium commercial vehicles. The combination of a short 6,700 mm overall length and three axles spreads a heavy body load over a wide base without greatly limiting the manoeuvrability of a compact vehicle.
When buying a used example, check the condition of the extra axle and its bearings, the brake system for a vehicle with this payload, and rust on the frame and axle mountings. Chassis and drivetrain parts run through the Iveco dealer network, parts for the individual body through the respective converter. Cab door seals and the condition of the wiring harness routed to the body are also worth a close inspection after years of service.
Sources: SpecCodex-Register: Kennwerte des Modells Iveco 70C18
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,998 cm³correct |
Dimensions and weights
| Length | 6,700 mmcorrect |
|---|---|
| Width | 2,350 mmcorrect |
| Wheelbase | 4,100 mmcorrect |
| Unladen weight | 4,205 kgcorrect |
| Gross vehicle weight | 7,200 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 90 km/hcorrect |
Frequently asked questions
How much does the Iveco/romcar 70C18 weigh?
The unladen weight is 4,205 kg.
What is the gross vehicle weight of the Iveco/romcar 70C18?
7,200 kg.
What engine does the Iveco/romcar 70C18 have?
4 cylinders, 2,998 cm³ displacement.
How fast does the Iveco/romcar 70C18 go?
Top speed is 90 km/h.
What are the dimensions of the Iveco/romcar 70C18?
6,700 mm × 2,350 mm.
When was the Iveco/romcar 70C18 built?
Production years: 2023.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
