Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Iveco › Eurocargo › Euro Cargo 80E15-P

Iveco Euro Cargo 80E15-P

Built: 1999 · Series: Eurocargo

More machines from model year 1999

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Eurocargo series from Iveco includes the Euro Cargo 80E15-P. Production: 1999. The engine delivers 105 kW, has 4 cylinders, with a displacement of 5,861 cm³. The vehicle is 8,070 mm long and 2,500 mm wide. The unladen weight is 6,260 kg. The gross vehicle weight is 7,490 kg. The gearbox offers 6 gears. The Eurocargo series covers 142 models. Rated output within it ranges from 95 to 235 kW; the Euro Cargo 80E15-P sits at the bottom of that range with 105 kW. Its immediate neighbours are the EuroCargo ML75E14 below it with 100 kW and the EURO GARGO 75E16 above it with 118 kW. Unladen weight within it ranges from 3,850 to 11,850 kg; here the Euro Cargo 80E15-P sits in the lower part of that range with 6,260 kg. 3135 Iveco models across 106 series are on record.

Iveco Eurocargo – the mid-weight truck from 6 tonnes built in Brescia: type code from weight class and power tens digit, Tector and Cursor engines, 95 to 235 kW, up to 18 tonnes gross weight

The Eurocargo is Iveco's mid-weight truck between 6 and 18 tonnes gross vehicle weight, which replaced the older ranges from the Fiat, OM and Magirus heritage in 1991, the brands from which Iveco was formed in 1975. It is built at the Brescia plant in northern Italy. Iveco's truck type code follows a fixed pattern: the first one to three digits give the weight class in tenths of a tonne of gross vehicle weight, E stands for the Euro emission standard, and the last two digits give the power in tens of hp – a 120E18 is thus a twelve-tonner with about 180 hp, a 75E17 a 7.5-tonner with 170 hp. Suffixes such as K for tipper, P and FP for platform and S-A for automated transmission mark the body and gearbox type. The Eurocargo is powered by Iveco's own four-cylinder Tector engines in the lighter and Cursor-derived six-cylinders in the heavier versions.

Read on 3 more paragraphs

The register lists here 142 versions with 95 to 235 kW from four- to six-cylinders of up to 7,790 cm³ displacement, unladen weights from 3,850 to 11,850 kg, gross weights from 6,800 to 18,000 kg, lengths from 6,100 to 11,900 mm and widths from 2,340 to 2,600 mm.

In Europe the Eurocargo occupies the gap between light vans and heavy long-haul trucks and competes there chiefly with the Mercedes-Benz Atego, the MAN TGL/TGM and the DAF LF. It is common as a tipper, flatbed, box-body truck and as a chassis for fire-brigade and municipal bodies, and is regarded as a robust distribution truck for urban and regional use.

On used examples, the condition of the injection pump and turbocharger on the Tector engines, corrosion on the frame and cab mounts on older model years, clutch actuation on automated (S-A) gearboxes, and the brake system including ABS/EBS all count; spare parts run through Iveco's dense dealer network.

Sources: SpecCodex register, model data: Iveco Eurocargo, Iveco (manufacturer)

Technical data

Engine

Power105 kWcorrect
Cylinders4correct
Displacement5,861 cm³correct

Dimensions and weights

Length8,070 mmcorrect
Width2,500 mmcorrect
Unladen weight6,260 kgcorrect
Gross vehicle weight7,490 kgcorrect

Drivetrain and chassis

Gears6correct

Where this model stands

Power-to-weight ratio: 16.8 kW/t (105 kW / 6.3 t)

Stronger than 7% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Iveco Euro Cargo 80E15-P have?

The Iveco Euro Cargo 80E15-P delivers 105 kW.

How much does the Iveco Euro Cargo 80E15-P weigh?

The unladen weight is 6,260 kg.

What is the gross vehicle weight of the Iveco Euro Cargo 80E15-P?

7,490 kg.

What engine does the Iveco Euro Cargo 80E15-P have?

4 cylinders, 5,861 cm³ displacement.

What are the dimensions of the Iveco Euro Cargo 80E15-P?

8,070 mm × 2,500 mm.

When was the Iveco Euro Cargo 80E15-P built?

Production years: 1999.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare