Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Iveco › Daily › Daily 70 C 18

Iveco Daily 70 C 18

Built: 2018 · Series: Daily

More machines from model year 2018

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Daily series from Iveco includes the Daily 70 C 18. Production: 2018. The engine delivers 132 kW, has 4 cylinders, with a displacement of 2,998 cm³. The vehicle is 7,050 mm long and 2,370 mm wide. The unladen weight is 3,250 kg. The gross vehicle weight is 7,200 kg. The Daily series covers 56 models. Rated output within it ranges from 100 to 155 kW; the Daily 70 C 18 sits in the middle of that range with 132 kW. Its immediate neighbours are the 65C18 3.0 HPT below it with 130 kW and the Daily 70C18HA8/P above it with 143.5 kW. Unladen weight within it ranges from 2,435 to 6,155 kg; here the Daily 70 C 18 sits in the lower part of that range with 3,250 kg. 3135 Iveco models across 106 series are on record.

Iveco Daily – the collective page of the light van in truck-chassis form outside the named ranges, from the 35 to the 70 weight class, four-cylinders of 2.8 to 3.0 litres, 100 to 155 kW

This page gathers the versions of the Iveco Daily, the light van and chassis range built since 1978, which Iveco manufactures in Suzzara, Italy, and which in chassis form reaches into the weight class of heavy vans. The type designation has followed the same pattern for decades: the first two digits give the gross vehicle weight in tenths of a tonne (35 for 3.5 t, 50 for 5.0 t, 65 for 6.5 t, 70 for 7.0 t), the letter C the chassis version with box body or flatbed, the following number the engine output in hp (C18 about 180 hp, C21 about 210 hp); A8 marks the eight-speed automatic, MY the model-year code of the newer generations. The heaviest chassis version, the Daily 72-180, marks the upper limit of the range with a 7.2-tonne gross weight.

Read on 3 more paragraphs

The register lists here 56 versions with 100 to 155 kW, throughout from four-cylinder engines of 2,798 to 3,000 cm³, unladen weights from 1,450 to 6,155 kg, gross weights from 3,500 to 10,000 kg, lengths from 5,000 to 8,820 mm and widths from 1,960 to 2,500 mm.

The Daily is one of Europe's most-built van and light-truck ranges and serves as the base for panel vans, flatbeds, tippers, box bodies and minibuses; in the heavy chassis class it competes with the Mercedes-Benz Sprinter, the Ford Transit and the VW Crafter.

On used examples of any chassis class, the condition of the turbocharger and injection, the condition of the clutch or automatic gearbox, rust on the frame and body subframes count, and on heavy versions brakes and suspension; parts run through Iveco's dense dealer network.

Sources: SpecCodex register, model data: Iveco Daily, Iveco (manufacturer)

Technical data

Engine

Power132 kWcorrect
Cylinders4correct
Displacement2,998 cm³correct

Dimensions and weights

Length7,050 mmcorrect
Width2,370 mmcorrect
Unladen weight3,250 kgcorrect
Gross vehicle weight7,200 kgcorrect

Where this model stands

Power-to-weight ratio: 40.6 kW/t (132 kW / 3.2 t)

Stronger than 15% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Iveco Daily 70 C 18 have?

The Iveco Daily 70 C 18 delivers 132 kW.

How much does the Iveco Daily 70 C 18 weigh?

The unladen weight is 3,250 kg.

What is the gross vehicle weight of the Iveco Daily 70 C 18?

7,200 kg.

What engine does the Iveco Daily 70 C 18 have?

4 cylinders, 2,998 cm³ displacement.

What are the dimensions of the Iveco Daily 70 C 18?

7,050 mm × 2,370 mm.

When was the Iveco Daily 70 C 18 built?

Production years: 2018.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare