Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Iveco › Flatbed truck (BA) › BA 2800 cm³

Iveco BA 2800 cm³ flatbed truck

Built: 2001 · Series: Flatbed truck (BA)

More machines from model year 2001

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the BA 2800 cm³ Pritschenwagen, Iveco offers a model from the Flatbed truck (BA) series. Production: 2001. The engine delivers 63 kW, has 4 cylinders, with a displacement of 2,800 cm³. The vehicle is 5,960 mm long and 2,150 mm wide. The unladen weight is 2,540 kg. The gross vehicle weight is 3,550 kg. The Flatbed truck (BA) series covers 7 models. Rated output within it ranges from 63 to 332 kW; the BA 2800 cm³ sits at the bottom of that range with 63 kW. Its immediate neighbours are the BA 5861 cm³ above it with 105 kW. Unladen weight within it ranges from 2,540 to 26,750 kg; here the BA 2800 cm³ sits at the bottom of that range with 2,540 kg. 3135 Iveco models across 106 series are on record.

Iveco Avolavakuorma-auto (BA) – the Finnish registration class for open-platform Iveco trucks: BA as the Traficom vehicle class, displacements of 2.8 to 12.9 litres, gross weights of 3.5 to 40 tonnes

This page gathers Iveco trucks with an open flatbed that are listed in the Finnish Traficom registration register under the vehicle class Avolavakuorma-auto (BA) – Finnish for open-platform truck (avolava = open load area, kuorma-auto = truck). The model names in the register therefore are not Iveco's own type designations but the Traficom class code together with the recorded engine displacement, for instance 2800cm3 or 2ov 2990cm3. The range spans from the light Daily chassis with a platform body to the heavy construction or municipal tipper on a Stralis or Trakker base, depending on displacement and gross weight.

Read on 3 more paragraphs

The register lists here 7 versions with outputs of 63 to 332 kW, four- to six-cylinder engines of 2,800 to 12,880 cm³ displacement, unladen weights of 2,540 to 26,750 kg, gross vehicle weights of 3,550 to 40,000 kg, lengths of 5,940 to 11,750 mm and widths of 2,150 to 2,550 mm.

Open-platform trucks of this kind are a fixture of construction, forestry and municipal services in Finland, where an open load area for bulk material, timber or equipment is preferred over a closed box body.

On a used example, on the lighter versions rust on the platform and frame and the condition of the side boards, on the heavy tippers the hydraulic rams, tipping body and brakes, on all sizes the engine condition and mileage, and on the gas or multi-axle variants the tank inspection intervals or axle bearings all count; parts run through the Iveco service network.

Sources: SpecCodex register, model data: Iveco Avolavakuorma-auto (BA), Iveco (manufacturer), Zulassungsdaten Traficom (Finnland)

Technical data

Engine

Power63 kWcorrect
Cylinders4correct
Displacement2,800 cm³correct

Dimensions and weights

Length5,960 mmcorrect
Width2,150 mmcorrect
Unladen weight2,540 kgcorrect
Gross vehicle weight3,550 kgcorrect

Where this model stands

Power-to-weight ratio: 24.8 kW/t (63 kW / 2.5 t)

Stronger than 1% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Iveco BA 2800 cm³ have?

The Iveco BA 2800 cm³ delivers 63 kW.

How much does the Iveco BA 2800 cm³ weigh?

The unladen weight is 2,540 kg.

What is the gross vehicle weight of the Iveco BA 2800 cm³?

3,550 kg.

What engine does the Iveco BA 2800 cm³ have?

4 cylinders, 2,800 cm³ displacement.

What are the dimensions of the Iveco BA 2800 cm³?

5,960 mm × 2,150 mm.

When was the Iveco BA 2800 cm³ built?

Production years: 2001.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare