Iveco AS190S/FP-CV
Built: 2014 · Series: AS190S
More machines from model year 2014
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco Stralis AS190S – long-haul truck with Active Space cab in the 19-tonne two-axle class: 10.3- to 12.9-litre six-cylinder engine, gross weight up to 23.2 tonnes, lengths up to 11,710 mm
The AS190S belongs to the Iveco Stralis range, which replaced the Eurostar and Eurotech predecessors from 2002 and was built until the S-Way took over from 2019. AS stands for the Active Space cab with a berth, built for long-haul work, and 190 for the 19-tonne two-axle class.
Read on 3 more paragraphs
The register lists 5 versions with six-cylinder engines from 10,308 to 12,882 cc. Kerb weight runs from 8,210 to 13,420 kg against a gross vehicle weight of 19,500 to 23,200 kg, length varies from 9,000 to 11,710 mm, and width from 2,550 to 2,600 mm.
With its sleeper cab and large-capacity engine, the AS190S is built for long-haul work with a semi-trailer or as a solo vehicle on a long wheelbase, where drivers sleep on board during multi-day runs – the wide cab offers more interior space than the Active Day versions built for day work.
When buying used, check the sleeper cab and its mounts, the turbocharger and exhaust aftertreatment of the large six-cylinder engine, the clutch and gearbox after high mileage on long-haul work, the brakes and air suspension, and rust on the frame and cab mounts. Parts are supplied through the Iveco service network. Mileage can be cross-checked against wear on the driver's seat, steering wheel and clutch pedal and the condition of the sleeper cab, since these tractor units often ran in multi-driver operation.
Sources: SpecCodex register, model data: Iveco AS190S, Iveco
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 10,308 cm³correct |
Dimensions and weights
| Length | 9,000 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 5,500 mmcorrect |
| Unladen weight | 8,210 kgcorrect |
| Gross vehicle weight | 23,200 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Iveco AS190S/FP-CV weigh?
The unladen weight is 8,210 kg.
What is the gross vehicle weight of the Iveco AS190S/FP-CV?
23,200 kg.
What engine does the Iveco AS190S/FP-CV have?
6 cylinders, 10,308 cm³ displacement.
What are the dimensions of the Iveco AS190S/FP-CV?
9,000 mm × 2,550 mm.
When was the Iveco AS190S/FP-CV built?
Production years: 2014.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
