Iveco AD260SX/FP-D
Built: 2017 · Series: AD260SX
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco Stralis AD260SX – 26-tonne distribution truck with Active Day cab and CNG versions: 7.8- to 8.7-litre six-cylinder engine, gross weight 27 to 27.5 tonnes, lengths up to 9,800 mm
The AD260SX, like the AD260S42Y, belongs to the Iveco Stralis range, which replaced the Eurostar and Eurotech predecessors from 2002. AD stands for the Active Day cab without a berth, built for day and distribution work, and 260 for the 26-tonne weight class. CNG versions dominate the model names, up to the Euro VI variant FP-D CNG EURO VI, alongside one standard diesel version.
Read on 3 more paragraphs
The register lists 5 versions with six-cylinder engines from 7,800 to 8,710 cc. Kerb weight runs from 14,100 to 16,979 kg against a gross vehicle weight of 27,000 to 27,500 kg, length varies from 8,580 to 9,800 mm, and width from 2,400 to 2,550 mm.
With its focus on natural-gas power, the AD260SX is built for urban distribution work in low-emission zones, for instance in beverage and fresh-goods logistics, where municipalities and retail chains increasingly favour CNG fleets; the higher kerb weight compared with pure diesel versions comes from the added gas tanks.
When buying used, check the gas tanks and their inspection dates and the gas system as a whole on CNG versions, the clutch and gearbox after frequent heavy use on all versions, the brakes and air suspension, and rust on the frame behind the rear axle. Parts are supplied through the Iveco service network. Mileage can be cross-checked against wear on the driver's seat, steering wheel and clutch pedal, since these distribution trucks often ran in multi-shift operation.
Sources: SpecCodex register, model data: Iveco AD260SX, Iveco
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 7,800 cm³correct |
Dimensions and weights
| Length | 9,450 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 5,000 mmcorrect |
| Unladen weight | 15,980 kgcorrect |
| Gross vehicle weight | 27,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Iveco AD260SX/FP-D weigh?
The unladen weight is 15,980 kg.
What is the gross vehicle weight of the Iveco AD260SX/FP-D?
27,000 kg.
What engine does the Iveco AD260SX/FP-D have?
6 cylinders, 7,800 cm³ displacement.
What are the dimensions of the Iveco AD260SX/FP-D?
9,450 mm × 2,550 mm.
When was the Iveco AD260SX/FP-D built?
Production years: 2017.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.