Iveco 40C13/375
Built: 2000-2004 · Series: 40C13
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco Daily 40C13 – 4-tonne truck chassis with twin rear wheels and around 130 hp: 92 kW, lengths from 6,150 to 8,300 mm, gross weight 4,200 kg
The 40C13 is a truck-chassis version of the Iveco Daily in the 4-tonne class: 40 marks the weight class, C the twin rear wheels, 13 the power tier of around 130 hp. Unlike the panel van versions, the 40C13 is a bare chassis for bodies such as flatbeds, box bodies or tippers.
Read on 3 more paragraphs
The register lists 5 versions rated at 92 kW with four-cylinder diesel engines from 2,287 to 2,800 cc. Kerb weight runs from 2,780 to 3,950 kg against a gross vehicle weight of 4,200 kg, length varies from 6,150 to 8,300 mm, and width from 2,130 to 2,320 mm.
At 4.2 tonnes gross, the 40C13 sits between the light 3.5-tonne Daily still drivable on a car licence and the heavier 5- and 6.5-tonne versions – a niche size bodybuilders use for box bodies in trades and beverage logistics.
When buying used, check the chassis frame and body mounting, the tightness of the turbocharger and intercooler on the 2.3- and 2.8-litre engines, the braking system, and uneven wear on the twin rear tyres, which points to worn stub axles or incorrect pressure. Parts are supplied through the Iveco service network. Mileage can be cross-checked against wear on the driver's seat, steering wheel and pedals and rust on the load-bed frame, since these chassis often served in construction and waste-management duty. A full service history helps confirm the figures.
Sources: SpecCodex register, model data: Iveco 40C13, Iveco
Technical data
Engine
| Power | 92 kWcorrect |
|---|---|
| Displacement | 2,800 cm³correct |
Dimensions and weights
| Length | 6,900 mmcorrect |
|---|---|
| Width | 2,130 mmcorrect |
| Unladen weight | 3,150 kgcorrect |
| Gross vehicle weight | 4,200 kgcorrect |
Where this model stands
Power-to-weight ratio: 29.2 kW/t (92 kW / 3.1 t)
Stronger than 5% of the trucks in the register — out of 25,242 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Iveco 40C13/375 have?
The Iveco 40C13/375 delivers 92 kW.
How much does the Iveco 40C13/375 weigh?
The unladen weight is 3,150 kg.
What is the gross vehicle weight of the Iveco 40C13/375?
4,200 kg.
What engine does the Iveco 40C13/375 have?
2,800 cm³ displacement.
What are the dimensions of the Iveco 40C13/375?
6,900 mm × 2,130 mm.
When was the Iveco 40C13/375 built?
Production years: 2000-2004.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.