Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Iveco › 35S12 › 35S12 VAN-3.55T/330

Iveco 35S12 VAN-3.55T/330

Built: 2006 · Series: 35S12

More machines from model year 2006

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Iveco 35S12 VAN-3.55T/330 is a panel van from the Daily family, built in 2006. In the type designation the 35 stands for gross weight in tenths of a tonne, the S for single tyres on the rear axle and the 12 for the approximate power class. The four-cylinder diesel has 2,290 cm³ displacement and delivers 85 kW.

At a permissible gross weight of 3,500 kg the van sits right at the limit up to which a standard car licence (category B in Germany) suffices, which makes it attractive to tradespeople and small hauliers. The unladen weight of 2,210 kg leaves plenty of room for freight. At 6,000 mm long and 2,000 mm wide the vehicle is compact enough for city centres.

The addition VAN denotes the closed panel version, as opposed to a chassis cab. The digits after the slash give the wheelbase variant. The Daily generation of these years is the second, which introduced common-rail technology.

Iveco Daily 35S12 – light vans of the 3.5-tonne class with single rear tyres: 2.3-litre diesel with about 85 kW, unladen weights from 1,990 to 3,250 kg, 9 versions in the register

The Iveco Daily 35S12, like the 35C, belongs to the Daily line, which IVECO has built since 1978 in Suzzara and Val di Sangro. The type logic is identical: the first two digits give the 3.5-tonne weight class, "S" here stands for single rear tyres instead of the "C" twin tyres, and the last two digits give the engine output divided by ten; 35S12 thus means about 120 hp. Model suffixes such as "DAILY", "VAN" or length codes such as "330" and "395" give the body variant and wheelbase.

Read on 3 more paragraphs

The register lists nine versions with about 85 kW from 2.3-litre four-cylinders, unladen weights from 1,990 to 3,250 kg, a uniform gross weight of 3,500 kg, lengths from 6,000 to 7,950 mm and widths from 1,996 to 2,340 mm.

The single rear tyres make the 35S lighter and more manoeuvrable than the 35C; it is favoured as a box van, combi and base for bodywork such as aerial platforms and refrigerated boxes, and alongside the Mercedes Sprinter and VW Crafter is one of the standard vans of European distribution traffic, where low running costs matter above all.

On used examples, operating hours and turbocharger condition matter, along with the common-rail injection, the condition of the single-tyre brakes and tyres, rust on the sills and load doors, and, on converted bodies, the mounting to the chassis; parts run through the Iveco network.

Sources: SpecCodex register, model data: Iveco Daily 35S12, Iveco (manufacturer)

Technical data

Engine

Power85 kWcorrect
Cylinders4correct
Displacement2,290 cm³correct

Dimensions and weights

Length6,000 mmcorrect
Width2,000 mmcorrect
Unladen weight2,210 kgcorrect
Gross vehicle weight3,500 kgcorrect

Where this model stands

Power-to-weight ratio: 38.5 kW/t (85 kW / 2.2 t)

Stronger than 48% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Iveco 35S12 VAN-3.55T/330 have?

The Iveco 35S12 VAN-3.55T/330 delivers 85 kW.

How much does the Iveco 35S12 VAN-3.55T/330 weigh?

The unladen weight is 2,210 kg.

What is the gross vehicle weight of the Iveco 35S12 VAN-3.55T/330?

3,500 kg.

What engine does the Iveco 35S12 VAN-3.55T/330 have?

4 cylinders, 2,290 cm³ displacement.

What are the dimensions of the Iveco 35S12 VAN-3.55T/330?

6,000 mm × 2,000 mm.

When was the Iveco 35S12 VAN-3.55T/330 built?

Production years: 2006.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Wikipedia (CC BY-SA 4.0) (retrieved October 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare