Iveco 35C12D EURO 4
Built: 2007-2009 · Series: 35C12D
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco Daily 35C12D – 3.5-tonne class of the Daily: EURO 3 and EURO 4 variants, four-cylinder engines from 2,286 to 2,287 cm³, unladen weights from 2,025 to 3,360 kg
The Iveco Daily 35C12D belongs to the 3.5-tonne class of the Daily, as indicated by the 35 in the type designation, while the C denotes the chassis-cab body style; the EURO 3 or EURO 4 suffix in the model variants refers to the applicable emissions standard, which affects injection and exhaust aftertreatment.
Read on 3 more paragraphs
The register lists here a total of 5 versions with displacement from 2,286 to 2,287 cm³ from four-cylinder engines, unladen weights from 2,025 to 3,360 kg, a gross vehicle weight of 3,500 kg and widths from 2,090 to 2,460 mm.
In panel van, flatbed and chassis form, the Daily 35C12D belongs to the single most common weight class across the entire Daily line-up, intended for professional delivery and trade use, and competes there with the Mercedes-Benz Sprinter, Ford Transit and Volkswagen Crafter in the 3.5-tonne class, with a similarly wide range of body styles.
When buying used, key points are rust on the frame, sills, wheel arches and load floor, the condition of the clutch and turbocharger, the history of timing belt or timing chain changes, and the tightness and condition of the body on panel van and flatbed variants; spare parts are widely available through the Iveco dealer network, which also stocks wear parts for older EURO 3 versions. Interior trim wear is also common on higher-mileage examples.
Sources: SpecCodex register, model data: Iveco 35C12D, Iveco
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,287 cm³correct |
Dimensions and weights
| Width | 2,460 mmcorrect |
|---|---|
| Wheelbase | 4,100 mmcorrect |
| Unladen weight | 2,660 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Iveco 35C12D EURO 4 weigh?
The unladen weight is 2,660 kg.
What is the gross vehicle weight of the Iveco 35C12D EURO 4?
3,500 kg.
What engine does the Iveco 35C12D EURO 4 have?
4 cylinders, 2,287 cm³ displacement.
When was the Iveco 35C12D EURO 4 built?
Production years: 2007-2009.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
