Iveco 25S18 SW5PW
Built: 2008 · Series: 25S18
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco 25S18 as a van-register entry: Daily range with single rear wheels, a 3.0-litre diesel, unladen weight 2,040 to 2,895 kg, gross weight up to 3,050 kg, as chassis cab, pickup and combi
The 25S18 belongs to the Iveco Daily family, built since 1978 as a light commercial in a wide range of body styles. The S in the type designation denotes single rear wheels. The model list shows the range's body variety: CC for Chassis Cab, a cab-chassis for individual bodywork, PU for pickup, and further combi variants; “Euro 4” dates the vehicles recorded here to the emissions generation of the mid-2000s.
Read on 3 more paragraphs
The register lists 6 versions with four-cylinder diesels of a constant 2,998 cm³, unladen weights from 2,040 to 2,895 kg and gross weights from 2,650 to 3,050 kg. Width runs from 1,750 to 1,970 mm.
As a cab-chassis and combi, the Daily covers a wide field of uses, from individually built tipper or dropside bodies for trades and municipalities to passenger transport in combi form, competing in this weight class with the Mercedes-Benz Sprinter and Ford Transit.
On a used example of this common-rail diesel, the condition of the injectors matters, on Euro 4 vehicles the EGR valve and particulate filter, the rear leaf springs under load, and rust at the lower door edges of the cab. Parts are widely available through the Iveco Daily network, as the range has run in large numbers for decades. The Daily cab remains unchanged between the S and C variants, which makes it easier to compare technical condition against other versions of the family.
Sources: SpecCodex register, model data: Iveco 25S18, Iveco (manufacturer)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,998 cm³correct |
Dimensions and weights
| Width | 1,850 mmcorrect |
|---|---|
| Wheelbase | 2,760 mmcorrect |
| Unladen weight | 2,040 kgcorrect |
| Gross vehicle weight | 3,050 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Iveco 25S18 SW5PW weigh?
The unladen weight is 2,040 kg.
What is the gross vehicle weight of the Iveco 25S18 SW5PW?
3,050 kg.
What engine does the Iveco 25S18 SW5PW have?
4 cylinders, 2,998 cm³ displacement.
When was the Iveco 25S18 SW5PW built?
Production years: 2008.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
