Iveco Cam 45-10C
Built: 1986 · Series: Other models
More machines from model year 1986
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco Cam 45-10C – light EU class N2 truck from the 1980s: four-cylinder engine, 4,650 kg gross weight, 7,630 mm length and 4,130 mm wheelbase
The 45-10C belongs to the light and medium truck class built across Europe in the 1980s on Iveco-based running gear. Vehicles of this size served as chassis for box bodies, flatbeds and municipal bodies and were often bodied regionally in small series.
Read on 3 more paragraphs
For the 45-10C the register lists a four-cylinder engine. Kerb weight is 3,930 kg, gross vehicle weight 4,650 kg. The vehicle is 7,630 mm long, 2,490 mm wide and has a wheelbase of 4,130 mm, carried on four wheels.
At 4,650 kg gross weight the 45-10C falls into EU vehicle class N2 for medium trucks between 3.5 and 12 tonnes. The long 4,130 mm wheelbase combined with a comparatively modest gross weight points to a box body or a long flatbed, as used in distribution haulage and trades work.
When buying a used example of this age, check above all for rust on the frame, spring mounts and brake lines, plus the condition of the clutch and gearbox of the four-cylinder diesel engine and the seals of the body. Drivetrain parts run through the Iveco dealer network, body parts through independent commercial-vehicle workshops, since the original bodybuilder often no longer exists. It is also worth checking the condition of the clutch plate and gearbox seals, and inspecting the exhaust system and mounting rubbers for cracking after decades of service.
Sources: SpecCodex-Register: Kennwerte des Modells Iveco Cam 45-10C
Technical data
Engine
| Cylinders | 4correct |
|---|
Dimensions and weights
| Length | 7,630 mmcorrect |
|---|---|
| Width | 2,490 mmcorrect |
| Wheelbase | 4,130 mmcorrect |
| Unladen weight | 3,930 kgcorrect |
| Gross vehicle weight | 4,650 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Iveco Cam 45-10C weigh?
The unladen weight is 3,930 kg.
What is the gross vehicle weight of the Iveco Cam 45-10C?
4,650 kg.
What engine does the Iveco Cam 45-10C have?
4 cylinders.
What are the dimensions of the Iveco Cam 45-10C?
7,630 mm × 2,490 mm.
When was the Iveco Cam 45-10C built?
Production years: 1986.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
