Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Isuzu › Other models › CDM R.F.010

Isuzu CDM R.F.010

Built: 2023-2024 · Series: Other models

More machines from model year 2023

Source: isuzu.com.ar

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CDM R.F.010 comes from Isuzu. Production: 2023-2024. The engine delivers 120 kW, has 4 cylinders, with a displacement of 1,898 cm³. The vehicle is 5,038 mm long and 1,900 mm wide. The unladen weight is 2,815 kg. The wheelbase measures 3,130 mm. The gross vehicle weight is 3,500 kg. The vehicle runs on 4 wheels. The gearbox offers 6 gears. Rated output across the Isuzu range ranges from 45 to 177 kW; the CDM R.F.010 sits in the middle of that range with 120 kW. Its immediate neighbours are the ISUZU below it with 110 kW and the FSR11-11T above it with 127 kW. Unladen weight across the Isuzu range ranges from 1,270 to 5,450 kg; here the CDM R.F.010 sits in the lower part of that range with 2,815 kg. 359 Isuzu models across 34 series are on record.

Isuzu – other models: the collective page of light commercial vehicles from the D-Max to the Elf/N series outside the named ranges, 45 to 120 kW, four-cylinder, 1,898 to 3,059 cm³

This page gathers light commercial Isuzu vehicles that the register could not assign to a named range – from the D-Max pick-up to Elf and N-series chassis. Isuzu is headquartered in Tokyo and is one of Japan's oldest commercial-vehicle makers; the Elf, sold internationally as the N-series, has formed the backbone of Isuzu's commercial-vehicle line-up since the 1950s, while the D-Max pick-up has been sold in Europe since the 2000s. The designations Kuorma-auto (lorry) and Tavara-auto (goods vehicle) in the Finnish registration data are vehicle categories of the local registration authority, not model names.

Read on 3 more paragraphs

The register lists here 141 versions with 45 to 120 kW from consistently four-cylinder engines of 1,898 to 3,059 cm³, unladen weights from 1,126 to 3,342 kg, gross weights from 1,900 to 3,500 kg, lengths from 4,690 to 6,520 mm and widths from 1,590 to 2,480 mm.

The segment thus runs from the compact pick-up to the 3.5-tonne chassis for box bodies and competes with the Toyota Hilux, Ford Ranger and the light Mitsubishi Fuso ranges.

On used pick-ups, what counts is rust on the frame and load bed, the condition of the four-wheel drive and differentials, and the timing belt or chain change; on Elf/N chassis, additionally the clutch, braking system and the condition of the body (box, curtain, refrigerated), which was usually added by a separate body builder.

Sources: SpecCodex register, model data: Isuzu (weitere Modelle), Isuzu Motors (manufacturer)

Technical data

Engine

Power120 kWcorrect
Cylinders4correct
Displacement1,898 cm³correct

Dimensions and weights

Length5,038 mmcorrect
Width1,900 mmcorrect
Wheelbase3,130 mmcorrect
Unladen weight2,815 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Gears6correct
Wheels4correct

Where this model stands

Power-to-weight ratio: 42.6 kW/t (120 kW / 2.8 t)

Stronger than 81% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Isuzu CDM R.F.010 have?

The Isuzu CDM R.F.010 delivers 120 kW.

How much does the Isuzu CDM R.F.010 weigh?

The unladen weight is 2,815 kg.

What is the gross vehicle weight of the Isuzu CDM R.F.010?

3,500 kg.

What engine does the Isuzu CDM R.F.010 have?

4 cylinders, 1,898 cm³ displacement.

What are the dimensions of the Isuzu CDM R.F.010?

5,038 mm × 1,900 mm.

When was the Isuzu CDM R.F.010 built?

Production years: 2023-2024.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare