Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Iseki › TJA8100

Iseki TJA8100

Series: TJA8000

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Iseki TJA8100 belongs to the TJA8000 series. The engine delivers 102 hp, has 3 cylinders, with a displacement of 3,300 cm³. Rated speed is 2,200 rpm. The machine is 3,950 mm long, 1,835 mm wide and 2,610 mm high. The unladen weight is 3,300 kg. The wheelbase measures 1,260 mm. Top speed is 39 km/h. The engine is water-cooled. The fuel is diesel. Rated output across the Iseki range ranges from 13 to 102 hp; the TJA8100 sits at the top of that range with 102 hp. Its immediate neighbours are the TJA8080 below it with 86 hp. Rated output across the Iseki range ranges from 13 to 102 hp; here the TJA8100 sits at the top of that range with 102 hp. 411 Iseki models across 17 series are on record.

Iseki TJA8080 and TJA8100 – the brand's upper power class: three-cylinder diesel of 3,300 cm³ and 86 to 102 hp, unladen weight from 3,100 to 3,300 kg

The TJA8000 range forms Iseki's upper power class, with three-cylinder diesel engines of 3,300 cm³; the TJA8080 and TJA8100 differ mainly in power output. Unlike Iseki's smaller compact tractors, these models are fully-fledged general-purpose tractors for medium-sized farms. Like many of Iseki's larger models, the TJA8000 range is built mainly for the Asian and European markets, where Iseki traditionally supplies base models for partner companies alongside its own brand.

Read on 3 more paragraphs

The register lists 2 versions of 86 to 102 hp from a three-cylinder engine of 3,300 cm³ at 2,200 rpm, unladen weights from 3,100 to 3,300 kg, lengths from 3,830 to 3,950 mm, widths from 1,833 to 1,835 mm and heights from 2,560 to 2,610 mm.

In this power class Iseki competes with Kubota, Yanmar and European mid-range tractors; the TJA8000 targets farms looking for a compact yet powerful general-purpose tractor for field work and transport, without the bulk of a large four-wheel-drive range.

On a used example, what counts is operating hours, the condition of clutch and gearbox, tightness of the hydraulics and the three-cylinder diesel, and rust on the chassis; spare parts in Europe come through Iseki importers and independent agricultural workshops.

Sources: SpecCodex register, model data: Iseki TJA8000, Iseki (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power102 hpcorrect
Power102 hpcorrect
Rated speed2,200 rpmcorrect
Cylinders3correct
Displacement3,300 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,950 mmcorrect
Width1,835 mmcorrect
Height2,610 mmcorrect
Wheelbase1,260 mmcorrect
Unladen weight3,300 kgcorrect

Drivetrain and chassis

Top speed39 km/hcorrect

Where this model stands

Power-to-weight ratio: 22.7 kW/t (75 kW / 3.3 t)

Power class: Large (100–180 hp)

Stronger than 67% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Iseki TJA8100 have?

The Iseki TJA8100 delivers 102 hp.

How much does the Iseki TJA8100 weigh?

The unladen weight is 3,300 kg.

What engine does the Iseki TJA8100 have?

3 cylinders, 3,300 cm³ displacement, Diesel.

How fast does the Iseki TJA8100 go?

Top speed is 39 km/h.

What are the dimensions of the Iseki TJA8100?

3,950 mm × 1,835 mm × 2,610 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare