Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Iseki › TH4335

Iseki TH4335

Series: TH

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TH4335 from Iseki is part of the TH series. The engine delivers 31.5 hp (23.2 kW), has 3 cylinders, with a displacement of 1,498 cm³. Rated speed is 2,600 rpm. The machine is 3,125 mm long and 1,130 mm wide. The unladen weight is 1,160 kg. The wheelbase measures 1,695 mm. Ground clearance is 220 mm. Lifting capacity is 1,100 kg. The engine is water-cooled. The gross vehicle weight is 2,000 kg. The fuel is diesel. Rated output across the Iseki range ranges from 13 to 102 hp; the TH4335 sits in the lower part of that range with 31.5 hp. Its immediate neighbours are the TH4295 below it with 27.6 hp and the TG3400 above it with 39.4 hp. Rated output across the Iseki range ranges from 13 to 102 hp; here the TH4335 sits in the lower part of that range with 31.5 hp. 411 Iseki models across 17 series are on record.

Iseki TH4295 and TH4335 – compact four-wheel-drive tractors from Ehime, Japan: three-cylinder diesel of 1,498 cm³, 20.3 to 23.2 kW, length 3,125 mm

Iseki is based in Ehime on the Japanese island of Shikoku and ranks among the leading Japanese makers of compact tractors; besides its own brand, Iseki has for decades also supplied the compact class for European manufacturers such as Massey Ferguson. The TH range denotes small four-wheel-drive tractors with a three-cylinder diesel engine, with the TH4295 and TH4335 differing mainly in power output. Besides tractors, Iseki also builds rice transplanters and combine harvesters that shape Japanese rice farming, the field from which the company historically originates.

Read on 3 more paragraphs

The register lists 2 versions of 20.3 to 23.2 kW (27.6 to 31.5 hp) from a three-cylinder engine of 1,498 cm³ at 2,500 to 2,600 rpm, an unladen weight of 1,160 kg, a lift capacity of 1,100 kg and a length of 3,125 mm; gross weight stands at 2,000 kg and width at 1,130 mm.

As compact four-wheel-drive tractors, the TH4295 and TH4335 are built for smaller farms, orchard and vineyard work, and municipal and yard tasks, where manoeuvrability matters more than pulling power; in this segment Iseki competes with Kubota, Yanmar and European compact ranges.

On a used example, what counts is operating hours, the condition of four-wheel drive and pto, tightness of the hydraulics, and rust on the chassis; parts for Iseki compact tractors in Europe run through specialist importers and independent workshops.

Sources: SpecCodex register, model data: Iseki TH, Iseki (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power31.5 hp (23.2 kW)correct
Rated speed2,600 rpmcorrect
Cylinders3correct
Displacement1,498 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,125 mmcorrect
Width1,130 mmcorrect
Wheelbase1,695 mmcorrect
Ground clearance220 mmcorrect
Unladen weight1,160 kgcorrect
Gross vehicle weight2,000 kgcorrect

Drivetrain and chassis

Top speed~25 km/hcorrect

Working data

Lifting capacity1,100 kgcorrect

Where this model stands

Power-to-weight ratio: 20 kW/t (23 kW / 1.2 t)

Power class: Compact (< 40 hp)

Stronger than 18% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Iseki TH4335 have?

The Iseki TH4335 delivers 31.5 hp.

How much does the Iseki TH4335 weigh?

The unladen weight is 1,160 kg.

What is the gross vehicle weight of the Iseki TH4335?

2,000 kg.

What engine does the Iseki TH4335 have?

3 cylinders, 1,498 cm³ displacement, Diesel.

How fast does the Iseki TH4335 go?

Top speed is 25 km/h.

How much does the rear linkage of the Iseki TH4335 lift?

The rear linkage lifts 1,100 kg.

What are the dimensions of the Iseki TH4335?

3,125 mm × 1,130 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3] [4]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare