Iseki TA 210F
Series: TA
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iseki TA 538 (TA line) – compact three-cylinder tractor with 28 kW, 1,510 kg unladen weight and 2,450 kg gross weight, built in 1997.
The TA 538 from Iseki's TA line was built in 1997 and belongs to the class of compact general-purpose tractors from this Japanese maker, designed for smaller agricultural and municipal work. Iseki specialises in such compact designs, common in Japan given its small fields and rice-growing plots.
Read on 3 more paragraphs
The TA 538 has a three-cylinder engine of 1,498 cm3 displacement and 28 kW of power. At 1,510 kg unladen weight and a gross weight of 2,450 kg, it leaves plenty of margin for mounted implements and payload. At 3,060 mm long and 1,420 mm wide, it is a compact, agile tractor well suited to tight yards and narrow field access.
A three-cylinder engine of 1.5 litres and 28 kW sits in the typical power class of compact general-purpose tractors of the 1990s, used for grassland care, smaller arable plots and municipal winter service. The roughly 940 kg gap between unladen and gross weight shows how much payload and implement weight the tractor can carry.
When buying a used TA 538 from the late 1990s, the hydraulic pump, power take-off and the condition of the front axle bearings belong on the inspection, along with the gearbox for smooth shifting. Rust on compact tractors of this build tends to start at the bonnet and footsteps, the wiring should be checked for corrosion at the connectors, and the brakes for even response on a test drive.
Sources: Kennwerte des Modells Iseki TA 538
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.