Intfor AHW 10-10
Built: 1997 · Series: Other models
More machines from model year 1997
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Intfor – other models: the collective page of trailers outside the named ranges, A328 and AHW 10-10, 7,980 to 23,200 kg unladen weight, 20,000 to 28,000 kg gross weight
This page gathers the Intfor trailers the register could not assign to a named range. Of the three entries listed, two carry proper type names, A328 and AHW 10-10, while a further entry is recorded without a type name of its own. As with many smaller trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 3 versions with unladen weights from 7,980 to 23,200 kg, gross weights from 20,000 to 28,000 kg, lengths from 10,080 to 11,570 mm and widths from 2,550 to 2,600 mm.
With gross weights of 20 to 28 tonnes and lengths around eleven metres, all versions fall into the class of heavy semi-trailers, towed in combination with an articulated tractor unit in long-haul and heavy transport and requiring a category CE licence. The narrow gap between unladen and gross weight on the heaviest versions shows the design aims at high payload rather than volume.
On a used example at this size, the condition of axles, braking system and brake linings, the kingpin and fifth-wheel plate, frame and side rails for distortion and rust, the function of the landing legs and the air-brake connections, and tyres and rims all count above all. Parts for such small brands usually run through independent commercial-vehicle and semi-trailer workshops.
Sources: SpecCodex register, model data: Intfor (weitere Modelle)
Technical data
Dimensions and weights
| Length | 11,570 mmcorrect |
|---|---|
| Width | 2,600 mmcorrect |
| Wheelbase | 7,500 mmcorrect |
| Unladen weight | 10,460 kgcorrect |
| Gross vehicle weight | 20,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Intfor AHW 10-10 weigh?
The unladen weight is 10,460 kg.
What is the gross vehicle weight of the Intfor AHW 10-10?
20,000 kg.
Up to what speed is the Intfor AHW 10-10 approved?
Approved up to 100 km/h.
What are the dimensions of the Intfor AHW 10-10?
11,570 mm × 2,600 mm.
When was the Intfor AHW 10-10 built?
Production years: 1997.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
