International M62
Built: 1952-1967 · Series: Other models
More machines from model year 1952
International – other models: the collective page outside the named ranges, from DuraStar, HV and HX through LoneStar and PayStar to school bus chassis, 22 to 164 kW, diesel and electric
This page gathers the International vehicles the register could not assign to a named range – from the Cargostar and Fleetstar classics of the 1960s and 1970s through the modern DuraStar, HV, HX, LT, LoneStar, MV and PayStar ranges to school bus chassis, which International, trading as Navistar International, also builds under its IC Bus subsidiary. International Harvester, operating as Navistar International since 1986, is headquartered in Illinois; the four-digit and lettered designations historically ordered payload class and today correspond to individual ranges.
Read on 3 more paragraphs
The register lists 105 versions here with 22 to 164 kW from six- and eight-cylinder engines of 2,830 to 15,125 cm³, unladen weights of 1,950 to 20,088 kg, gross vehicle weights of 3,450 to 38,951 kg and lengths of 5,100 to 11,900 mm; the majority run on diesel, with a smaller share electric.
International covers the entire North American spectrum from medium-duty distribution trucks to heavy long-haul and construction vehicles, while also being one of the larger suppliers of school bus chassis; competitors are Freightliner, Kenworth, Peterbilt and Mack, while the bus segment competes mainly with Blue Bird and Thomas Built Buses.
When buying used, check the turbocharger and injection system on the diesel engines (including the DT-466 family), frame corrosion and air suspension condition on the chassis, safety equipment such as doors and warning lights on bus bodies, and battery condition and charge cycles on the electric versions; parts run through the Navistar International dealer network.
Sources: SpecCodex register, model data: International (weitere Modelle), International Trucks (Navistar)
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 7,900 cm³correct |
Dimensions and weights
| Length | 8,780 mmcorrect |
|---|---|
| Width | 2,480 mmcorrect |
| Wheelbase | 5,230 mmcorrect |
| Unladen weight | 14,859 kgcorrect |
| Gross vehicle weight | 31,941 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the International M62 weigh?
The unladen weight is 14,859 kg.
What is the gross vehicle weight of the International M62?
31,941 kg.
What engine does the International M62 have?
6 cylinders, 7,900 cm³ displacement.
What are the dimensions of the International M62?
8,780 mm × 2,480 mm.
When was the International M62 built?
Production years: 1952-1967.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
1754
1853 4X2 DSL FBC
1854 4 X 4
190 SERIES RFD192
3000 SERIES
3000 SERIES 3800 THOMAS
4400 SBA 4X2
4700 4XZ
4700 DT 466E
4700-T44E
9300 6X4 SFA
9900 I SFA 6X4
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.