International 1480 – specifications
Series: International Combine
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
International combine harvester – register of the 1460/1480 range: six-cylinder International DT-436 engine, 7,141.5 cm³, 2,500 rpm
International Harvester was founded in Chicago and was for decades one of the world's largest agricultural-machinery makers before its farm-equipment division became part of Case IH in 1985. This page gathers the register of International combine harvesters with the types 1460 and 1480, belonging to the manufacturer's Axial-Flow range. After the merger with Case, many International sales outlets were absorbed into the new Case IH network.
Read on 3 more paragraphs
The register lists 2 versions with the six-cylinder International DT-436 diesel engine (7,141.5 cm³) at 2,500 revolutions per minute.
International's Axial-Flow combines introduced rotary threshing to series production in the late 1970s and stood as the technical counterpart to the established straw-walker combines from John Deere, Claas and Massey Ferguson. Drivetrain parts are usually still easy to source thanks to the kinship with later Case IH models, while body-specific sheet-metal parts are becoming scarcer.
When buying used, check the condition of the threshing rotor and concave, the tightness of the sieve boxes and transport fans, the condition of the header and chopper knives, and the mileage and service history of the DT-436 engine; spare parts today run through the Case IH network and independent agricultural-machinery suppliers. It is also important to check the function of the gearbox and the hydrostatic travel drive, as leaks in these assemblies are common on older combines.
Sources: SpecCodex register, model data: International Mähdrescher
Technical data
Engine
| Engine make | Internationalcorrect |
|---|---|
| Engine model | DT-436correct |
| Rated speed | 2,500 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 7,141.5 cm³correct |
Dimensions and weights
| Wheelbase | 3,550.9 mmcorrect |
|---|
Working data
| Fuel tank capacity | 473.2 lcorrect |
|---|
Frequently asked questions
What engine does the International 1480 have?
6 cylinders, 7,142 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.
