Start › Compaction equipment › Ingersoll Rand › SD45F

Ingersoll Rand SD45F

Series: Ingersoll Rand Vibratory Compactor

Source: https://commons.wikimedia.org/wiki/File:Ingersoll-Rand_SD-70

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The SD45F from Ingersoll Rand is part of the Ingersoll Rand Vibratory Compactor series. The engine delivers 59.7 kW, has 4 cylinders. Rated speed is 2,200 rpm. The unladen weight is 5,148.3 kg. Ground clearance is 368 mm. Top speed is 7.9 km/h. The tank holds 98.4 litres. The hydraulic tank holds 94.6 litres. The electrical system runs on 12 V. The engine fitted is the 4BT 3,3. The Ingersoll Rand Vibratory Compactor series covers 10 models. Rated output within it ranges from 32.8 to 152.9 kW; the SD45F sits in the lower part of that range with 59.7 kW. Its immediate neighbours are the SD25F below it with 32.8 kW and the SD70F above it with 73.8 kW. 271 Ingersoll Rand models across 12 series are on record. The model is listed under Road construction. 12 verified figures from 1 source are on file.

Technical data

Engine

Engine model4BT 3.3correct
Power59.7 kWcorrect
Rated speed2,200 rpmcorrect
Cylinders4correct
Aspirationturbochargedcorrect

Dimensions and weights

Ground clearance368correct
Unladen weight5,148.3 kgcorrect

Drivetrain and chassis

Top speed7.9 km/hcorrect
System voltage12 Vcorrect

Working data

Hydraulic oil capacity94.6 lcorrect
Fuel tank capacity98.4 lcorrect

Other data

Height2,886.5correct

Where this model stands

Power-to-weight ratio: 11.6 kW/t (60 kW / 5.1 t)

Stronger than 18% of the compaction equipment in the register — out of 223 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ingersoll Rand SD45F have?

The Ingersoll Rand SD45F delivers 59.7 kW.

How much does the Ingersoll Rand SD45F weigh?

The unladen weight is 5,148 kg.

What engine does the Ingersoll Rand SD45F have?

4 cylinders.

How fast does the Ingersoll Rand SD45F go?

Top speed is 7.9 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

SD100D

SD105F

SD116F

SD122F

SD160F

SD200F

SD25F

SD70F

SD77F

Sources: [1]

Road roller in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare