Technical register for agricultural, construction and commercial machinery · sourced data

Ihi Agri Tech C0.7

Built: 2017-2020 · Series: Other models

More machines from model year 2017

The photo shows the 6382/2400 from the same series. Source: https://engine.kubota.com/products/detail?id=62&ln=en

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The C0.7 comes from Ihi Agri Tech. Production: 2017-2020. The fuel is 7-15 ppm Ultra Low Sulfur Diesel. The rated output is 9 kW. The engine is naturally aspirated. The engine meets emissions stage Tier 4 (Final or Phase In). Fuel reaches the combustion chamber through indirect injection. It is a four-stroke diesel engine. The cylinders are arranged in line. Rated output across the Ihi Agri Tech range ranges from 4 to 50 kW; the C0.7 sits at the bottom of that range with 9 kW. Its immediate neighbours are the YN8/2800 below it with 8 kW and the S773L-F above it with 10 kW. 296 Ihi Agri Tech models across 2 series are on record.

IHI Agri-Tech – other nonroad diesel engines: the collective page of small engines for construction and farm machinery, formerly Shibaura, 4 to 50 kW from two- to four-cylinders, Tier 3 to Tier 4 Final

IHI Agri-Tech, which emerged from the Japanese engine and farm-machinery maker Shibaura and is today part of the IHI group, builds small-displacement diesel engines for mini excavators, compact loaders and farm machinery. This page gathers the engines the register could not assign to a named range; model designations such as 404D-22T or N4LDI-TA in the version column do not follow a uniformly documented system, but the EPA engine-family codes such as KH3XL2.22TD3 encode displacement (2.22 litres) and emission generation.

Read on 3 more paragraphs

The register lists here 291 versions with 4 to 50 kW rated output at 1,500 to 3,600 rpm, from two- to four-cylinders with 67 to 84 mm bore and 72 to 100 mm stroke, torques from 20.6 to 208 Nm, model years from 2012 to 2020. Indirect injection prevails with around 236 versions combined against 55 direct-injection engines; among the emission stages Tier 4 (Final or Phase-in) leads with 183 ahead of Interim Tier 4 with 108 versions.

Engines of this class chiefly drive mini excavators, compact loaders and small farm implements; as a supplier, IHI Agri-Tech equips both its own machines and outside manufacturers with no small-diesel production of their own in the lowest power segment.

On a used purchase, on the predominantly indirect-injection engines the glow-plug system and cold-start behaviour count, the condition of injection pump and nozzles, the tightness of crankshaft seals and valve-cover gasket, and on the few turbocharged versions the turbocharger itself; since the model years lie mostly before 2020, parts availability is worth checking in advance.

Sources: SpecCodex register, model data: IHI Agri-Tech (weitere Nonroad-Dieselmotoren)

Technical data

Engine

Engine codeEH12/2200correct
Engine familyKH3XL.761F2Vcorrect
Engine familiesHH3XL.761F1C; JH3XL.761F1Ccorrect
Fuel7-15 ppm Ultra Low Sulfur Dieselcorrect
Rated output9 kWcorrect
Power band8<=kW<19correct
Rated speed2,200 rpmcorrect
Maximum torque43 N·mcorrect
Speed at max. torque1,800 rpmcorrect
Cylinders3correct
Cylinder layoutin linecorrect
Bore67 mmcorrect
Stroke72 mmcorrect
Operating cyclefour-stroke dieselcorrect
Injectionindirect injectioncorrect
Aspirationnaturally aspiratedcorrect
Emissions stageTier 4 (Final or Phase In)correct

Origin and approval

VersionEH12/2200correct
Built from2017correct
Built to2018correct
Model year from2017correct
Model year to2020correct
Sales regionbothcorrect

Frequently asked questions

How much power does the Ihi Agri Tech C0.7 have?

The Ihi Agri Tech C0.7 delivers 9 kW.

When was the Ihi Agri Tech C0.7 built?

Production years: 2017-2020.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Diesel engine in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare