Hyundai HBF 15III
Series: Hyundai Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Fuel | electriccorrect |
|---|
Dimensions and weights
| Width | 1,070 mmcorrect |
|---|---|
| Ground clearance | 1,250.2 mmcorrect |
Drivetrain and chassis
| Top speed | 14.8 km/hcorrect |
|---|---|
| Turning radius | 1,780 mmcorrect |
Working data
| Lifting capacity | 1,500 kgcorrect |
|---|---|
| Lift height | 3,300 mmcorrect |
Other data
| Front wheels | 2correct |
|---|---|
| Load centre | 500.4 mmcorrect |
| Mast tilt back | 10°correct |
| Mast tilt forward | 6°correct |
| Rear wheels | 2correct |
Frequently asked questions
How fast does the Hyundai HBF 15III go?
Top speed is 14.8 km/h.
What is the load capacity of the Hyundai HBF 15III?
Load capacity is 1,500 kg at a 500 mm load centre, lift height 3,300 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.