Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Huttner › Other models › SATY-34/2H

Huttner SATY-34/2H

Built: 2002 · Series: Other models

More machines from model year 2002

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Huttner SATY-34/2H is a vehicle built by Huttner. Production: 2002. The vehicle is 11,000 mm long and 2,540 mm wide. The unladen weight is 7,720 kg. The wheelbase measures 9,500 mm. Top speed is 100 km/h. The gross vehicle weight is 38,000 kg. Unladen weight within this group ranges from 85 to 84,800 kg; the SATY-34/2H sits at the bottom of that range with 7,720 kg. Its immediate neighbours are the Schwebheim below it with 7,710 kg and the SK024/L-13.62FP25EXPRESS2 above it with 7,722 kg. Gross vehicle weight within this group ranges from 470 to 722,500 kg; here the SATY-34/2H sits at the bottom of that range with 38,000 kg.

Huttner SATY-34/2H – EU class O4 trailer: 38,000 kg gross vehicle weight, 30,280 kg payload, 11.00 m length, 9.50 m wheelbase, built in 2002.

With a gross weight of 38,000 kg, the Huttner SATY-34/2H falls into EU trailer class O4, the heavy trailers and semi-trailers above 10 tonnes. Vehicles in this class take on loads in commercial goods transport that a single truck can no longer carry economically, running as a trailer behind a separate towing vehicle. They are used in long-distance haulage, construction traffic and the transport of machinery and bulk goods, where payload determines the economics of each run.

Read on 3 more paragraphs

With an unladen weight of 7,720 kg, payload comes to 30,280 kg. At 11.00 m long, 2.54 m wide and with a 9.50 m wheelbase, the trailer sits on a long chassis that carries most of its length between the axles.

From class O3 upwards, trailers of this size are generally fitted with air brakes rather than the simple overrun brake used on light trailers. Towing it as a combination requires driving licence category C1E or CE in the EU, depending on the combined train weight. The air brake system must be checked annually for function and leak-tightness as part of the periodic roadworthiness test.

When buying a used unit, start by checking the frame: cracks or additional weld seams on the main rails are grounds for rejection. Check the brake system for leaks and even action across all axles, listen to the axle bearings for play, check the tyres for even wear, and inspect the drawbar and its coupling eye for wear, cracks and properly executed repairs. Wheel chocks and their holder are part of the basic equipment and should be complete.

Sources: SpecCodex-Register: Kennwerte des Modells Huttner SATY-34/2H, Zulassungsdaten RDW (Niederlande)

Technical data

Dimensions and weights

Length11,000 mmcorrect
Width2,540 mmcorrect
Wheelbase9,500 mmcorrect
Unladen weight7,720 kgcorrect
Gross vehicle weight38,000 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Huttner SATY-34/2H weigh?

The unladen weight is 7,720 kg.

What is the gross vehicle weight of the Huttner SATY-34/2H?

38,000 kg.

Up to what speed is the Huttner SATY-34/2H approved?

Approved up to 100 km/h.

What are the dimensions of the Huttner SATY-34/2H?

11,000 mm × 2,540 mm.

When was the Huttner SATY-34/2H built?

Production years: 2002.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare