Hummel DS 52 – specifications
Built: 1952 · Series: DS
Data for the version built 1952 · Data origin: Reference work (Wikipedia/Wikibooks) · sources
More machines from model year 1952
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The DS 52 is a tractor from the DS series manufactured by Hummel. This model dates back to 1952 and represents the early phase of agricultural mechanization within this product line. As a single-cylinder machine with a displacement of 499 cm³, the tractor is positioned in the segment of light tractors designed for specific tasks in field farming.
The technical equipment includes a single-cylinder engine that delivers an output of 10 hp or 7.4 kW. This power level is sufficient for light soil cultivation work and the transport of smaller loads. The empty weight of 640 kg ensures moderate ground pressure, which can be advantageous when working on sensitive soils. The tires, sized 9.5 R-24 on the front axle and 15.5 R-38 on the rear axle, ensure good traction and stability during operation. The transmission transfers power directly to the drive wheels, allowing for simple operation without complex shifting procedures.
Within the DS series, the DS 52 represents the entry-level model in terms of engine power. It forms the basis for the other variants in the series and defines the lower power range of the line. Tractors of this size are typically suitable for farmyard work, light plowing, and use in fruit and vineyard cultivation, where compact dimensions and low fuel consumption are the primary considerations.
Technical data
Engine
| Power | 10 hp (7.4 kW)correct |
|---|---|
| Cylinders | 1correct |
| Displacement | 499 cm³correct |
| Displacement | 499 cm³correct |
Dimensions and weights
| Unladen weight | 640 kgcorrect |
|---|
Drivetrain and chassis
| Front tyres | 9.5 R-24correct |
|---|---|
| Rear tyres | 15.5 R-38correct |
| Drive type | Getriebecorrect |
Where this model stands
Power-to-weight ratio: 11.6 kW/t (7 kW / 0.6 t)
Power class: Compact (< 40 hp)
Stronger than 1% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Hummel DS 52 have?
The Hummel DS 52 delivers 10 hp.
How much does the Hummel DS 52 weigh?
The unladen weight is 640 kg.
What engine does the Hummel DS 52 have?
1 cylinders, 499 cm³ displacement.
When was the Hummel DS 52 built?
Production years: 1952.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.